Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Синтезаторы/фортепиано - CLP-525 (408.53 kb)
Синтезаторы/фортепиано - CLP-525 (123.76 kb)
Синтезаторы/фортепиано - CLP-525 (79.22 kb)
Синтезаторы/фортепиано - CLP-525 (2.33 mb)
Фрагмент инструкции
MIDI Functions
When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The
explanations here cover the settings necessary for performing MIDI communication between both devices.
NOTE
For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations” downloadable from the Yamaha website:
http://download.yamaha.com/
MIDI Transmit/Receive Channel Selection
In order to perform MIDI communication between this instrument and a computer, it is
MIDI transmission channels
necessary to match the corresponding MIDI transmit and receive channels. By setting the
in Dual
MIDI transmit channels on this instrument, the setting of the keyboard or pedal
Voice 1 data is transmitted on
the channel set up here.
performance or the program change can be transmitted over the channel number
Voice 2 data is transmitted on
corresponding to a specified channel on the computer. By properly setting the MIDI receive
the next greater channel number
relative to the specified channel.
channels on this instrument, only data of the specified channel will be played back in the
MIDI receive channel = ALL:
MIDI data received from the computer.
This allows simultaneous
reception of different parts on all
Setting the Transmit Channel
16 MIDI channels. When SMF
Song data is played back on a
While holding down [DEMO/SONG] and [PIANO/VOICE], press one of the C1 – E2
computer with the Voice of this
instrument, this setting should
keys.
be selected. However, when a
Voice not available on the
instrument is specified, the
Setting the Receive Channel
playback sound may not be
suitable.
While holding down [DEMO/SONG] and [PIANO/VOICE], press one of the C4 – F5
MIDI receive channel = 1+2:
keys.
This allows simultaneous
reception on channels 1 and 2
E2
F5
only. When SMF Song data is
played back on a computer, this
setting should be selected for
playing back only data of
channels 1 and 2 on this
instrument.
C1
C4
NOTE
2
4
7 9 11
14 16
2 4
7 9 11
14 16
Panel settings (Voices, etc.) of
this instrument will not be
affected by MIDI messages
received from a computer.
NOTE
1 3 5 6 8 10 12 13 15 OFF
1 3 5 6 8 10 12 13 15 1+2 ALL
Data for the demo songs and
piano preset songs cannot be
Transmit Channel
Receive Channel
transmitted via MIDI.
(C1 – E2)
(C4 – F5)
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the
internal tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the
keyboard of the instrument does not play the internal voices.
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing
Default setting:
the C6 key repeatedly toggles between Local Control On and Off.
ON
C6
CLP-525 MIDI Reference
2
...