Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
2 2 Use the TAB [E EEEE][F] buttons to call up the desired page. For details about each display Page, refer to the Reference Manual on the website. • VOL/VOICE Changes the Voice for each part and adjusts panning and volume for each part (page 90). Using the Auto Revoice function, you can also convert the sound of commercially available XG song to the special sound using this instrument’s special Voices. • FILTER Adjusts the Harmonic Content (resonance) and sound brightness. • TUNE Pitch-related settings (tuning, transpose, etc.). • EFFECT Selects effect type and adjusts its depth for each part (page 92). • EQ Adjusts equalization parameters to correct the tone or timbre of the sound. • CMP (CVP-509) This is the Master Compressor setting which determines the dynamics of overall sound. See page 93. 8 NOTE The Master Compressor is not applied to USB audio playback and Metronome sound. 88 CVP-509/505/503/501 Owner’s Manual 3 3 The part name is indicated at the top of the display. 8 Song, Style, MIC (CVP-509/505/503), Keyboard parts (Left, Right 1, 2) Rhythm 1, 2, Bass, Chord 1, 2, Pad, Phrase 1, 2 Song channels 1 – 8 Song channels 9 – 16 4 Use the [A] – [J] buttons to select a parameter, then use the [1 ^Ў] – [8 ^Ў] buttons to set the value for each part. 5 Save your MIXING CONSOLE settings. • To save the PANEL PART display settings: Register them to Registration Memory (page 79). • To save the STYLE PART display settings: Save them as Style data. 1. Call up the operation display. [FUNCTION] > [F] DIGITAL REC MENU > [B] STYLE CREATOR 2. Press the [EXIT] button to close the RECORD display. 3. Press the [I] (SAVE) button to call up the Style Selection display for saving your data, then save it (page 68). • To save the SONG CH 1-8/9-16 display settings: First register the edited settings as part of the Song data (SETUP), then save the Song. 1. Call up the operation display. [FUNCTION] > [F] DIGITAL REC MENU > [A] SONG CREATOR 2. Use the TAB [E EEEE][F FFFF] buttons to select the CHANNEL Page. 3. Use the [A]/[B] buttons to select “SETUP.” 4. Press the [D] (EXECUTE) button. 5. Press the [I] button to call up the Song Selection display for saving your data, then save it (page 68). NOTE The Style/Song part components are the same as those that appear in the display when you press the panel [CHANNEL ON/OFF] button once or twice. NOTE If you simultaneously hold down one of the [A] – [J] buttons and use the [1 ^Ў] – [8 ^Ў] buttons (or the DATA ENTRY dial), you can instantly set the same value to all other parts. Mixing Console – Editing Volume and Tonal Balance CVP-509/505/503/501 Owner’s Manual 89 Changing Voices and Adjusting Panning/Volume for Each Part You can change the Voice and adjust panning and volume for each keyboard part, Style channel or Song channel. Changing the Voice for each part 1 Same operation as in the “Basic Procedure” on page 88. In step 2, select VOL/VOICE tab. 2 Press the [C] (or [H]) button to select the VOICE parameter. Mixing Console – Editing the Volume and Tonal Balance – 3 3 Press one of the [1 ^Ў] – [8 ^Ў] buttons to select the desired part. The Voice Selection display appears. 4 Select a Voice. Press one of the Voice category selection buttons on the panel, then select a Voice by using the [A] – [J] buttons (page 37). 5 Press the [EXIT] button to return to the MIXING CONSOLE display. 6 Save your settings (step 5 on page 89). 8 NOTE • Some Voices (such as Organ Flutes) cannot be selected for Style channels. • The RHY2 channel in the STYLE PART display can only be assigned Drum kit Voices and SFX kit Voices. • When playing GM Song data, channel 10 can only be used for a Drum kit Voice. 90 CVP-509/505/503/501 Owner’s Manual Adjusting Panning/Volume for each part 1 Same operation as in the “Basic Procedure” on page 88. In step 2, select VOL/VOICE tab. 2 Press the [D] (or [I]) button to select the PANPOT parameter or press the [E] (or [J]) button to select the VOLUME parameter. PANPOT VOLUME 3 Use the [1 ^Ў] – [8 ^Ў] buttons to adjust panning/volume for the desired part. 4 Save your settings (step 5 on page 89). Mixing Console – Editing Volume and Tonal Balance 8 CVP-509/505/503/501 Owner’s Manual 91 Mixing Console – Editing the Volume and Tonal Balance – 8 Mixing Console – Editing the Volume and Tonal Balance – 8 Applying Effects to Each Part 1 Same operation as in the “Basic Procedure” on page 88. In step 2, select EFFECT tab. 2 2 Use the [C]/[D]/[E] buttons to select the desired effect. • REVERB: Reproduce the warm ambience of playing in a concert hall or jazz club. • CHORUS: Produces a rich “fat” sound as if several parts are being played simultaneously. • DSP: By default, the most appropriate effect for the selected Voice has been selected. 3 Use the [1 ^Ў] – [8 ^Ў] buttons to adjust the depth of each effect for the desired part. 4 Save your settings (step 5 on page 89). NOTE You can change the effect type by pressing the [F] (TYPE) button. Refer to the Reference Manual. 92 CVP-509/505/50...