Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
High Threshold Determines the minimum input level at which the effect is applied to the high frequencies. Horn Speed Fast Determines the speed of the horn when the slow/fast switch is set to Fast. Horn Speed Slow Determines the speed of the horn when the slow/fast switch is set to Slow. HPF Cutoff Determines a specific value, depending on the selected Effect type. Frequency For Reverb type, tech type, or misc type, this parameter determines the Cutoff Frequency of the High-Pass Filter. For Vocoder, this parameter determines the Cutoff Frequency for the High- Pass Filter applied to the microphone sound. HPF Output Level Determines how much the output from High-Pass Filter is mixed with the output from the Vocoder. 2-3-9 I Initial Delay Determines the amount of time that elapses between the direct, original sound and the initial reflections. Initial Delay 1, 2 Determines the delay time until the initial reflection for each of the first series and second series. Initial Delay Lch, Rch Determines the amount of time that elapses between the direct, original sound and the initial reflections (echoes) that follow it for each of R and L channels. Input Level Determines the input level of the signal to which the compressor is applied. Input Mode Selects mono or stereo configuration for the input sound. 60 Effects Effects Selects an input channel. Inst Input Level Determines the level of the keyboard performance sound which is to be input to the Vocoder. 2-3-10 L L/R Depth Determines the depth of the L/R pan effect. L/R Diffusion Determines the spread of the sound. Lag Determines the lag time that is additionally applied to the delayed sound specified via a note length. LFO Depth Determines a specific value, depending on the selected Effect type. For SPX Chorus, Symphonic, Classic Flanger, and Ring Modulator, this parameter determines the depth of the modulation. For Tempo Phase, this parameter determines the frequency of the phase modulation. LFO Phase Determines the L/R phase difference of the modulated wave. Difference LFO Phase Reset Determines how to reset the initial phase of the LFO. LFO Speed Determines a specific value, depending on the selected Effect type. For Chorus effects, Flanger effects, Tremolo and Ring Modulator, this parameter determines the frequency of the modulation. For Tempo Phaser and Tempo Franger, this parameter determines the modulation speed via a note type. For Auto Pan, this parameter determines the frequency of the Auto Pan. LFO Wave Determines a specific value, depending on the selected Effect type. For Flanger effects and Ring Modulator, this parameter selects the wave for modulation. For Auto Pan, this parameter determines the panning curve. For VCM Auto Wah, this parameter selects the wave: sine or square. Liveness Determines the decay characteristic of Early Reflection. Low Attack Determines the amount of time from the moment a key is pressed to the moment the compressor is applied to the low frequencies. Low Gain Determines the output gain for the low frequencies. Low Level Determines the output level for the low frequencies. Low Mute Determines whether the low frequency band is off or on. Low Ratio Determines the ratio of low frequencies. When “REV-X Hall” or “REV-X Room” is selected, this parameter determines the ratio of the low frequencies. When “Multi Band Comp” is selected, this parameter determines the ratio of the compressor for the low frequencies. Low Threshold Determines the minimum input level at which the effect is applied to the low frequencies. LPF Cutoff Freqency Determines the Cutoff Frequency of the Low-Pass Filter. LPF Resonance Determines the resonance of the low pass filter for the input sound. 61 Effects Effects M Manual Determines a specific value, depending on the selected Effect type. For VCM Flanger, this parameter determines the offset value of the delay modulation. For VCM Phaser mono and VCM Phaser stereo, this parameter determines the offset value of the phase modulation. Meter Changes the meter. Mic Gate Threshold Determines the threshold level of the noise gate for the microphone sound. If noise interferes with the Vocoder effect, set this parameter to a relatively high value to prevent noise from producing inadvertent, unexpected sounds. Mic Level Determines the input level of the microphone sound. Mic L-R Angle Determines the L/R angle of the microphone. Mid Attack Determines the amount of time from the moment a key is pressed to the moment the compressor is applied to the mid frequencies. Mid Gain Determines the output gain for the mid frequencies. Mid Level Determines the output level for the mid frequencies. Mid Mute Switches the mute status of the mid frequencies. Mid Ratio Determines the ratio of the compressor for the mid frequencies. Mid Threshold Determines the minimum input level at which the effect is applied for the mid frequencies. Mix Determines the volume of the effect sound. Mix Level Determines the level of the effect sound mixed ...
Эта инструкция также подходит к моделям:Синтезаторы/фортепиано - CP40 STAGE (3.49 mb)
Синтезаторы/фортепиано - MOXF6 (3.49 mb)
Синтезаторы/фортепиано - MOXF8 (3.49 mb)