Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
7 When the installation is complete, the system displays “Completing the Found New Hardware Wizard.” Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation is complete. 8 Restart the computer. The driver has been installed. 6 Accessory CD-ROM Installation Guide (PF-500) 1Start the computer. 2 Select [Start | Control Panel]. If the control panel appears as shown below, click “Switch to Classic View” in the upper left of the window. All control panels and icons will be displayed. 3 [System | Hardware | Driver Signing | File Signature Verification], and check the radio button to the left of “Ignore -Install all files, regardless of file signature” and click [OK]. 4 Click the [OK] button to close System Properties, and then click “X” in the upper right of the window to close the Control Panel. 5Insert the included CD-ROM into the CD-ROM drive. 6 Make sure the POWER switch on the PF-500 is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the PF-500. When the PF-500 is turned on, the computer automatically displays the “Found New Hardware Wizard.” 7 Check the radio button to the left of “Search for a suitable driver for my device. (Recommended).” Click [Next]. The system starts the installation. 8When the installation is complete, the system displays “Completing the Found New Hardware Wizard.” Click [Finish]. nSome computers may take about ten seconds to show this screen after the installation is complete. 9Restart the computer. The driver has been installed. Serial Driver 1 Double-click on the “Mididrv_” folder. “Setup.exe” file will be displayed. 2 Double-click on the “Setup.exe” file. When the setup has been initialized, the “Welcome” window will appear. 3Click [Next]. The “Select operation” window will appear. 4 Click the radio button to the left of “Install YAMAHA CBX Driver.” Click [Next]. 5 The license agreement for the YAMAHA CBX Driver will be displayed. Please read it carefully. 6 Click [Yes]. The “Select COM port” window will appear. English Accessory CD-ROM Installation Guide (PF-500) 7 English 7 Click the radio button to the left of the COM port to use. Normally you will use COM1. Click [Next]. “Select the number of MIDI output ports” will appear. 8 Click the radio button to the left of the “Use multiple MIDI output ports” and click [Next]. The MIDI driver will be installed, and the “MIDI Mapper Question” window will appear. 9 Click [Yes]. The system displays the following message “Set the HOST SELECT switch on a tone module to PC-2.” 0 Click [OK]. A message will inform you that setup has been completed. A In order for the newly installed YAMAHA CBX Driver to take effect, make sure that “Yes, I want to restart my computer now” is installed, and click [OK]. The computer will restart. The driver has been installed. File Utility, MIDI Setup Once you‘ve installed these software programs, you can use your computer to access and organize data stored to media connected to the PF-500 (Storage memory). 1 Double-click on the “FileUtil_” folder in the CD-ROM. “Setup.exe” file will be displayed. 2 Double-click on the “Setup.exe” file. The File Utility setup dialog will be displayed. 3Execute the installation by following the on-screen directions. For details, refer to the on-line Help or the PDF owner’s manual. MIDI port setting (MIDI SETUP) Before setting the MIDI port on the File Utility, you should set the MIDI port from the MIDI SETUP toolbar. 1Start the File Utility. 2Click the MIDI Setup button in the Toolbar called up via step #1. MIDI Setup button 3 In the MIDI Setup window called up via step#2, click the [] button at the right end of each box and make the port settings as shown. nIn order for MIDI ports to be available here, you’ll need to select the relevant MIDI port within the application software —File Util- ity. This is the port that you’ll use in the various software. For de- tails on setting the MIDI port, refer to the PDF manual of File Utility. 8 Accessory CD-ROM Installation Guide (PF-500) For Macintosh Users Contents of the CD-ROM The CD-ROM contains a variety of applications (with installers) and data are contained in the following folders. Folder Name Application Name Contents Acroread_ Acrobat Reader 4.0 *1 *2 PDF (Portable Document Format) viewer. Enables you to view each PDF manual for the applications. OMS_ Open Music System (OMS) 2.3.8 *2 Enables you to use several MIDI applications on the Mac OS. OMS Setup for YAMAHA Contains the OMS Setup files for the Yamaha PF-500. USBdrv_ YAMAHA USB MIDI Driver Enables your computer to communicate with the PF-500 when your computer and the PF-500 are connected using a USB cable. FileUtil_ File Utility *2 Enables you to manage files in the storage memory on the PF-500. SongData Demonstration Song Enables you to use the File Utility to transmit data to the PF-500 so you can enjoy demo song (SMF file) playback on the PF-500. yamahamus...