Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики Yamaha DGX-530 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Press the “G” key in the section of the keyboard labeled “ROOT”. (The note doesn’t sound.) The root note you set is shown in the display. 3 Press the “M7” (major seventh) key in the section of the keyboard labeled “CHORD TYPE”. (The note doesn’t sound.) The notes you should play for the specified chord (root note and chord type) are shown in the display, both as notation and in the keyboard diagram. Notation of chord Chord name (root and type) Individual notes of chord (keyboard) To call up possible inversions of the chord, press the [+]/[-] buttons. NOTE • About major chords: Simple major chords are usually indicated only by the root note. For example, “C” refers to C major. However, when specifying major chords here, make sure to select “M” (major) after pressing the root note. • Be aware that the chord types explained here are the left-hand notes applied to various styles and different from the one for the performance assistant technology feature. 4 Try playing a chord in the auto accompaniment section of the keyboard, checking the indications in the display. When you’ve played the chord properly, a bell sound signals your success and the chord name in the display flash. Press the [EXIT] button to return to the MAIN display. 84 DGX-530/YPG-535 Owner’s Manual Reference References Song Volume 1 Press the [FUNCTION] button. Can be set between 000 and 127 Song volume item f 2 Use the CATEGORY [ tons to select the Song Volume item. 3 Use the dial to set the song volume between 000 and 127. ] and [ r ] but- NOTE A-B Repeat You can specify a section of a song—“A” is the start point and “B” is the end point—for repeat playback. • Song volume can be adjusted while a song is selected. 2 Press the [A-B REPEAT] button a second time at the end of the section you want to repeat (the “B” point). A B 1 Play the song (page 31) and press the [A-B REPEAT] button at the beginning of the section you want to repeat (the “A” point). 3 The specified A-B section of the song will now play repeatedly. You can stop repeat playback at any time by pressing the [A-B REPEAT] button. NOTE • The repeat start and end points can be specified in one-measure increments. • The current measure number is shown in the display during playback. • If you want to set the start point “A” at the very beginning of the song press the [A-B REPEAT] button before starting playback of the song. DGX-530/YPG-535 Owner’s Manual 85 Muting Independent Song Parts Each “track” of a song plays a different part of the song—melody, percussion, accompaniment, etc. You can mute individual tracks and play the muted part on the keyboard yourself, or simply mute tracks other than the ones you want to listen to. Use the SONG MEMORY [1]–[5] and [A] buttons to mute or un-mute the corresponding tracks. The border around the track number in the display disappears when that track is muted. Refer to page 58 for information about the song track configuration. Change the Melody Voice No track number ... no data. Track number without border ... track contains data but is muted. Track number with border ... track contains data and is not muted. You can change a song’s melody voice to any other voice you prefer. NOTE •You cannot change the melody voice of a user song. Press the lesson [L] and [R] buttons simultaneously so that “LR” appears in the upper right corner of the MAIN display. Select the song and play it. 1 Press the [VOICE] button for longer than a second. The VOICE SELECT (MELODY R or MELODY L) display will appear so you can select the Melody R or Melody L voice. Pressing the [VOICE] button alternates between VOICE SELECT MELODY R and MELODY L. Hold for longer than a second 2 Use the dial to select the voice. As you select different melody voices, only the melody voice changes while the song will remain the same. 86 DGX-530/YPG-535 Owner’s Manual Memorize Your Favorite Panel Settings Reference This instrument has a Registration Memory feature that lets you save your favorite settings for easy recall whenever they’re needed. Up to 16 complete setups can be saved (8 banks of two setups each). •You can also save your panel settings memorized to registration memory button into USB flash memory as the user file or to a computer as the backup file. 8 Banks Memory 1 Memory 2 Up to 16 presets (eight banks of two each) can be memorized. Saving to the Registration Memory 1 Set the panel controls as required— select a voice, accompaniment style, etc. 2 Press the [MEMORY/BANK] button. A bank number will appear in the display when you release the button. Bank number 3 Use the dial or the [1]–[8] number buttons to select a bank number from 1 to 8. NOTE 4 Press the REGIST MEMORY [1] or [2] button while holding the [MEMORY/ BANK] button to store the current panel settings to the specified registration memory. Press the [EXIT] button to return to the MAIN display in order to check the bank and registration memory numbers. Bank number NOTE NOTE • If you select a Registration Memory number t...
Эта инструкция также подходит к моделям:Синтезаторы/фортепиано - YPG-535 (3.68 mb)