Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Синтезаторы/фортепиано - YDP-142 (123.76 kb)
Синтезаторы/фортепиано - YDP-142 (405.07 kb)
Фрагмент инструкции
2 MIDI Transmit/Receive Channel Selection ....................................................................2 Local Control ON/OFF ..................................................................................................2 Program Change ON/OFF ............................................................................................3 Control Change ON/OFF ..............................................................................................3 MIDI Data Format ................................................................................ 4 MIDI Implementation Chart ................................................................ 8 EN MIDI Functions MIDI Functions For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations” downloadable from the Yamaha Manual Library. MIDI Transmit/Receive Channel Selection MIDI transmission channels in Dual In order to perform MIDI communication between this instrument and a computer, it is necessary to match the corresponding MIDI transmit and receive channels. By setting the Voice 1 data is transmitted on MIDI transmit channels on this instrument, the setting of the keyboard or pedal performance the channel set up here. Voice 2 data is transmitted on or the program change can be transmitted over the channel number corresponding to a the next greater channel specified channel on the computer. By properly setting the MIDI receive channels on this number relative to the specified instrument, only data of the specified channel will be played back in the MIDI data received channel. from the computer. MIDI receive channel = ALL: This allows simultaneous Setting the Transmit Channel reception of different parts on all 16 MIDI channels. When While holding down [DEMO/SONG] and [PIANO/VOICE], press the C1–E2 keys. SMF Song data is played back on a computer with the Voice of Setting the Receive Channel this instrument, this setting is While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4–F5 keys. selected. However, when a Voice not available on the instrument is specified, the E2 F5 playback sound may not be suitable. MIDI receive channel = 1+2: This allows simultaneous reception on channels 1 and 2 only. When SMF Song data is C1 C4 played back on a computer, this setting is selected for 2 4 7 9 11 14 16 2 4 7 9 11 14 16 playing back only data of channels 1-2 on this instrument. Panel settings (Voices, etc.) of this instrument will not be 1 3 5 6 8 10 121315 OFF 1 3 5 6 8 10 12 13 15 1+2 ALL affected by MIDI messages received from a computer. Transmit Channel Receive Channel (C1–E2) (C4–F5) Data for the demo song and piano preset songs cannot be transmitted via MIDI. Local Control ON/OFF “Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the keyboard of the instrument does not play the internal voices. While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing the Default setting C6 key repeatedly toggles between Local Control On and Off. ON C6 YDP-162/142 MIDI Reference 2 MIDI Functions MIDI Functions The information related to Voice changes is called “program change” in MIDI. Sending and receiving program change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer. (However, the Voice as played from the keyboard is maintained and does not change.) While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. C6 Control Change ON/OFF For information on program change numbers for each of the Voices of the instrument, refer to page 4. Default setting ON Information related to non-note expressive changes, such as the use of a sustain pedal, is called “control change” in MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played from the instrument is maintained and does not change.) While holding down [DEMO/SONG] and [PIANO/VOICE], press the D6 key. Pressing the For information on control D6 key repeatedly toggles between Local Control On and Off. changes that can be used with the instrument, refer to page 4. Default setting ON D6 YDP-162/142 MIDI Reference 3 MIDI Data Format MIDI Data Format 0: Can be transmitted and recognized. .: Cannot be t...
Эта инструкция также подходит к моделям:Синтезаторы/фортепиано - YDP-162 Digital Piano (1.07 mb)