Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Синтезаторы/фортепиано - CLP-320 (870.06 kb)
Синтезаторы/фортепиано - CLP-320 (258.63 kb)
Фрагмент инструкции
NOTE ON/OFF Data format: [9nH] . [kkH] . [vvH] 9nH = Note ON/OFF event (n = channel number) kkH = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8) vvH = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H) Data format: [8nH] . [kkH] . [vvH] (reception only) 8nH = Note OFF event (n = channel number) kkH = Note number: 00H ~ 7FH = C-2 ~ G8) vvH = Velocity 2. CONTROL CHANGE Data format: [BnH] . [ccH] . [vvH] BnH = Control change (n = channel number) ccH = Control number vvH = Data Range (1) Bank Select ccH Parameter Data Range(vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H...7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Modulation (reception only) ccH Parameter Data Range (vvH) 01H Modulation 00H...7FH (3) Main Volume ccH Parameter Data Range (vvH) 07H Volume MSB 00H...7FH (4) Panpot (reception only) ccH Parameter Data Range (vvH) 0AH Panpot 00H...7FH (5) Expression ccH Parameter Data Range (vvH) 0BH Expression MSB 00H...7FH (6) Damper ccH Parameter Data Range (vvH) 40H Damper MSB 00H...7FH (7) Sostenuto ccH Parameter Data Range (vvH) 42H Sostenuto 00H-3FH:off, 40H-7FH:on (8) Soft Pedal ccH Parameter Data Range (vvH) 43H Soft Pedal 00H-3FH:off, 40H-7FH:on (9) Harmonic Content (reception only) ccH Parameter Data Range (vvH) 47H Harmonic Content 00H...7FH (10) Release Time (reception only) ccH arameter ata Range (vvH) 48H elease Time 00H...7FH (11) Attack Time (reception only) ccH Parameter Data Range (vvH) 49H Attack Time 00H...7FH (12) Brightness (reception only) ccH Parameter Data Range (vvH) 4AH Brightness 00H...7FH (13) Portamento Control ccH Parameter Data Range (vvH) 54H Portamento 00H...7FH (14) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H...7FH Adjusts the reverb send level. (15) Effect3 Depth (Chorus Send Level) ccH Parameter Data Range (vvH) 5DH Chorus Depth 00H...7FH (16) RPN 65H RPN MSB 64H RPN LSB 06H Data Entry MSB 26H Data Entry LSB 60H Data Increment 61H Data Decrement * Parameters that are controllable with RPN • Coarse Tune • Fine Tune • Pitch Bend Range 3. MODE MESSAGES Data format: [BnH] . [ccH] . [vvH] BnH = Control event (n = channel number) ccH = Control number vvH = Data Range (1) All Sound Off ccH Parameter Data Range (vvH) 78H All Sound Off 00H (2) Reset All Controllers ccH Parameter Data Range (vvH) 79H Reset All Controllers 00H Resets controllers as follows. Controller Value Expression 127 (max) Damper Pedal 0 (off) Sostenuto 0 (off) Soft Pedal 0 (off) (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. • When Control Change is turned OFF, Control Change messages will not be transmitted or received. • Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off ” transmission). • When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. •Poly mode is always active. This mode will not change when the instrument receives MONO/POLY mode message. 2 CLP-320 Data List / Daten-Liste / Liste des donnees / Lista de datos 4. PROGRAM CHANGE Data format: [CnH] . [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number CLP-320 MSB LSB P.C.# Grand Piano 1 0 122 1 Grand Piano 2 0 112 1 E.Piano 1 0 122 6 E.Piano 2 0 122 5 Harpsichord 1 0 122 7 Harpsichord 2 0 123 7 Vibraphone 0 122 12 Church Organ 1 0 123 20 Church Organ 2 0 122 20 Strings 0 122 49 • When program change reception is turned OFF, no program change data is transmitted or received. • When you specify a program change as a number in the range of 0-127, specify a number that is one less than the program change number listed above. For example, to specify program change number 1, you would specify program change 0. 5. Pitch Bend Change [EnH] . [ccH] . [ddH] ccH = LSB ddH = MSB 6. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing Data Transmission Reception F8H Transmitted every 96 clocks Received as 96-clock tempo timing when MIDI clock is set to External. FAH Song start Song start Not re...