Оценок - 1, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Now, only the tone of the button you just pressed is sounded. Changing the Tone variations 1. Press the [-] or [+] button to change the Upper Tone. 2. Hold down the Tone button for the Lower Tone, and press the [-] or [+] button to change the Lower Tone. 1 You can change the pitch of the Lower Tone an octave at a time. Refer to “Changing the Pitch of the Lower Tone in Octave Steps (Octave Shift)” (p. 44). You can vary the volume- level balance of the two tones. Take a look at “Changing the Volume Balance for Dual Play and Split Play” (p. 21). Upper Tone orange Lower Tone red NOTE When the Tone Wheel is selected, you cannot enable the dual mode (p. 15). Although when you press the pedal while in Dual Play, the effect is applied to both tones, you can set the FP-5 so that the effect is not applied to the Lower Tone. Refer to “Changing How the Pedal Effects Are Applied” (p. 43). Chapter 1 Playing the Keyboard Performing With Different Tones in the Left and Right Sides of the Keyboard (Split Play) Performing with the keyboard divided at a certain key into a left side and a right side is called “Split Play,” and the point at which the keyboard is divided is called the “split point.” In Split Play, you can have a different tone sound in the left and right sides. When the instrument is turned on, the split point is set to “F 3.” The split point key is included in the left side. While in Split Play, a sound played in the right side is called an “Upper Tone,” and the sound played in the left side is called a “Lower Tone.” Example: Let’s try split play with the piano tones. 1. Press the [Piano] button. Now, the piano tone is selected. 2. Press the [Split] button, getting its indicator to light. The keyboard is divided into upper and lower sections. The right-hand section of the keyboard plays piano tone, and the left-hand section plays A. Bass+Ride tone. You can play a tone for the right side (the Upper Tone) before splitting the keyboard. The Tone button’s indicator lights in red for the Upper Tone, and in green for the Lower Tone. 3. To exit Split Play, press the [Split] button once more. The [Split] button’s indicator light goes out and the upper tone becomes the tone for the entire keyboard. You can specify which part is to have priority when the effects assigned to the Upper Tone and Lower Tone differ. Refer to “Setting the Part to Which Effects Are Added” (p. 44). 12,3 You can vary the volume- level balance of the two tones. Take a look at “Changing the Volume Balance for Dual Play and Split Play” (p. 21). F 3 (Split Point) Lower Tone Upper Tone When the “Tone Wheel” tone is selected to the Lower Tone, the [Tone Wheel] button’s indicator light in red (p. 16). When you switch from Dual Play (p. 18) to Split Play, the Upper Tone used in Dual Play is selected as the Upper Tone for Split Play. Chapter 1 Playing the Keyboard ¦ Changing Tone Group and Tone variation. Changing the Upper Tone 1. Press the Tone button to choose a Tone Group. 2. Press the [-] and [+] buttons to select the Tones. Changing the Lower Tone 1. Hold down the [Split] button and press the Tone button to choose a Tone Group. 2. Hold down the [Split] button and press the [-] and [+] buttons to select a Tones. For more on selecting tones, refer to “Performing with a Variety of Sounds” (p. 14). ¦ Changing the Keyboard’s Split Point You can change the location where the keyboard is divided (the split point) within the range of B1 through B6. This is set to “F 3” when the instrument is turned on. This setting remains in effect until you turn off the power. 1. Hold down the [Split] button and press a key set as the split point. The key you pressed becomes the split point, and appears in the display. The key being used as the split point belongs to the left-hand section of the keyboard. When you release the [Split] button, you return to the previous screen. 2,4 3,41,2 When the tone of the same Tone button is selected for both the Upper and Lower Tones, the indicator for Tone button flash in green while the [Split] button is held down. You can change the pitch of the Lower Tone an octave at a time. Refer to “Changing the Pitch of the Lower Tone in Octave Steps (Octave Shift)” (p. 44). F 3 B1 B6 The name of the key acting as the split point is indicated in the display, as shown below. Display Letter name Display Letter name Display Letter name C d_ d E_ C D D E E F F G E F F G A_ A b_ b A A B B Chapter 1 Playing the Keyboard 21 Changing the Volume Balance for Dual Play and Split Play You can change the volume balance of the Upper and Lower Tones in Dual Play (p. 18) and Split Play (p. 19). 1. Use the [Balance] knob to adjust the volume balance. 1 You cannot change the volume balance even if you turn the [balance] knob, when Tone Wheel Organs are selected to both the Upper Tone and the Lower Tone. Chapter 1 Playing the Keyboard Changing the Keyboard’s Touch You can change the touch sensitivity, or response of the keys. When the instrument is turned on, thi...