Оценок - 1, средний балл: 5 ( )

Производитель: Roland Размер: 14.42 mb Название файла: A-300PRO_500PRO_800PRO_OM.pdf Язык инструкции:

MIDI messages from the computer connected via USB to the A-PRO will be transmitted to a sound module connected to the A-PRO’s MIDI OUT connector. MIDI messages from a MIDI device connected to the A-PRO’s MIDI OUT device MIDI IN device A-PRO MIDI OUT A-PRO A-PRO MIDI IN A-PRO 1 MIDI I/F MODE ON USB BULK reception PORT 1 MIDI OUT MIDI IN connector will be sent to the A-PRO 2 MIDI messages PORT 2/ BULK transmission 66 System Settings (EDIT Mode) System Settings (EDIT Mode) The A-PRO provides a [MIDI MERGE] switch ( p. 11). Here’s how to specify the port that will be merged as the MIDI MERGE DESTINATION when the [MIDI MERGE] switch is On. The MIDI MERGE function is convenient when an external MIDI controller other than the A-PRO is connected to the A-PRO’s MIDI IN connector. For example, you might connect a second A- PRO unit, and use one A- PRO to play a software synthesizer while using the other A-PRO unit to control your DAW software. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “MIDI SETTING,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “MIDI MERGE DEST,” and press the [ENTER] button. 4 Use the [VALUE] knob to specify the desired MIDI merge destination. The display will indicate the value you selected. 5 Press the [ENTER] button to return to Play mode. Number Setting Explanation 1 PORT1 Messages received at MIDI IN will be merged into the A-PRO’s PORT 1. 2 PORT2 Messages received at MIDI IN will be merged into the A-PRO’s PORT 2. 3 MIDI OUT Messages received at MIDI IN will be merged into the A-PRO’s MIDI OUT. MIDI MERGE switch and MIDI MERGE DESTINATION fig. MIDI-MERGE.eps In this illustration, the [MIDI MERGE] switch is On and the MIDI MERGE DESTINATION is set to Port 2, so that messages received at MIDI IN are merged with the messages of Port 2 and sent to the computer. * If you turn the [MIDI MERGE] will arrive even if you’ve selected A-PRO as the MIDI IN device on your computer. MIDI I/F MODE ON MIDI messages MIDI MERGE DESTINATION [MIDI MERGE] switch MIDI OUT device MIDI IN device A-PRO MIDI OUT BULK reception MIDI OUT MIDI IN MIDI OUT PORT 1 PORT 2/ BULK transmission PORT 1 ON OFF PORT 2 A-PRO A-PRO MIDI IN A-PRO 1 A-PRO 2 USB 67 System Settings (EDIT Mode) Control Map Settings [VALUE] knob Settings System Settings (EDIT Mode) Control Map Settings [VALUE] knob Settings Here you can specify which control map is to be called up when the A-PRO is powered up. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “SYSTEM SETTING,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “STARTUP MEMORY,” and press the [ENTER] button. 4 Use the [VALUE] knob to choose “CTL MAP 0” or “LAST ACC MAP. ” Setting Explanation CTL MAP 0 Control map number 0 will be selected at start-up. LAST ACC MAP The control map that was last selected and saved will be called up upon start-up. 5 Press the [ENTER] button. FUNCTION Here you can specify the function that is to be controlled by the [VALUE] knob when the cursor is located at USER ASSIGN. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “FUNCTION,” and press the [ENTER] button. 3 Use the [VALUE] knob to choose the parameter that will be assigned to the [VALUE] knob. 4 Press the [ENTER] button. 5 If you selected “CONTROL CHANGE” as the parameter, use the [VALUE] knob to specify the desired control change number. 6 Press the [ENTER] button. Value Setting Explanation Value range 1 KEY VELOCITY Fixes the key velocity value. The A-PRO detects the force with which you play the keyboard, and transmits this as the velocity value; however, this setting causes a fixed velocity to be transmitted regardless of how strongly you strike the keyboard. Use this if you don’t want your playing dynamics to have an effect. TOUCH, 1–127 *If you choose TOUCH, the transmitted velocity value will depend on your keyboard playing strength. 2 BANK LSB Specifies the bank select LSB (CC#32). 0–127 3 BANK MSB Specifies the bank select MSB (CC#00). 0–127 4 CONTROL CHANGE Specifies a control change. 0–127 5 TEMPO Specifies the MIDI CLOCK 20–250 68 System Settings (EDIT Mode) Other Settings System Settings (EDIT Mode) Other Settings Turn this On when using certain applications (such as Pro Tools LE). If this is On, the message “90 00 7F” will be transmitted to “A-PRO 2” at intervals of approximately 500 ms. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “SYSTEM SETTING,” and press the [ENTER] button. 3 Use the [VALUE] knob to choose “H-ACTVTY ON/OFF,” and press the [ENTER] button. 4 Use the [VALUE] knob to specify either “ON” or “OFF. ” 5 Press the [ENTER] button. L9 FUNCTION This specifies the function of the [HOLD] button. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “SYSTEM SETTING,” and press the [ENTER] button. 3 Use the [VALUE] knob to choose “L9 FUN...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: