Оценок - 6, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
2-11 French .......................................................................... 12-21 German ....................................................................... 22-31 Italian ........................................................................... 32-41 Dutch ........................................................................... 42-51 This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. DANGER - To reduce the risk of electric shock: • A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. • Always unplug before relamping. Replace bulb with same type rated 15 Watt. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: • Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children and infi rm persons. • Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. • Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. • Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth. • Keep fi ngers away from all moving parts. Special care is required around the sewing machine needle. • Always use the proper needle plate. The wrong plate can cause the needle to break. • Do not use bent needles. • Do not pull or push fabric while stitching. It may deflect the needle causing it to break. • Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc. • Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. • Never drop or insert any object into any opening. • Do not use outdoors. • Do not operate where aerosol (spray) products are being used or where oxygen is being administrated. • To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet. • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • The sound pressure level under normal operating conditions is 70dB(A). SAVE THESE INSTRUCTIONS Table of Contents Table of Contents ..........................................3 Overview of the machine .............................3 Accessories ...................................................... 4 Setting Up ........................................................ 4 Attaching the power cord and foot control 4 Machine speed ............................................... 4 For the USA and Canada ..............................4 Cloth Presser ................................................... 5 Getting Started ............................................... 6 Fabric and trims that can be used ................ 6 Laundering embellished projects .................6 Overview of the machine NOTE: Laundering rules of “pre-washing”: ................................................ 6 Start Embellishing .......................................... 7 Flat Bed Extension / Free Arm................... 8 Accessory Storage .......................................... 8 Maintenance .................................................... 9 Changing the needle(s) ................................. 9 Replacing the light bulb...............................10 Cleaning the lint box ....................................10 Trouble Shooting .........................................11 Needle bent or Needle breakage ..............11 Specifi cations ................................................11 English 1. Handwheel 2. Socket for foot control 3. Power switch 4. Needle clamp holder 5. Needle plate 6. Flat Bed Extension 7. Accessory storage 8. Cloth presser height adjusting screw 9. Clear fabric cover with needle guard 10. Connection socket 3 Accessories 1. Screwdriver 2. 1,5 mm Allen wrench 3. Needles 4. Cleaning brush 5. Machine cover 6. Instruction book Setting Up Attaching the power cord and foot control Plug the power cord into machine socket, then into a wall outlet. Always make sure the power is OFF and remove the plug from the wall outlet when the machine is not in use, or when making any adjustments such as changing needles or light bulb. Note: Before ...