Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Elastic Overlock Stitch: for sewing stretch materials. 1 Put the fabric under the presser foot so that the seamline (or arrowhead point) is approximately 3 mm (1/8 inch) to the left of the center of the presser foot. • If the seam allowance is wider than the stitch pattern, trim away any excess fabric after stitching. Memo . When sewing the Elastic Overlock Stitch, position the fabric so that its edge is on the left of the needle. 32 BUILT-IN STITCHES Feather stitching Use the Feather Stitch as a decorative top stitch when embroidering or when hemming blankets, tablecloths, or draperies. 1 Place the fabric right side up and sew 1 cm (3/8 inch) from the edge of the fabric. 2 Trim close to the stitching. The stitch will prevent the fabric from unravelling. Triple zigzag stretch stitching This stitch can be used wherever a zigzag stitch would be used to sew heavyweight stretch fabrics. The Triple Zigzag Stretch Stitch can also be used as a decorative top stitch. Decorative stitching These stitches can be used for decorative top stitching and for smocking. Refer to page 10 for the recommended stitch width and length of each stitches. Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] 37 27 Feather Stitch Fixed 2.5 (3/32) 3-5 (1/8-3/16) Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] 37 27 Triple Zigzag Stretch Stitch Fixed 2.5 (3/32) 3-5 (1/8-3/16) 24 19 21 16 Stitch Name Pattern Stitch Name Pattern 37 27 37 27 Scallop Stitch Decorative Stitch Bead Stitch Decorative Stitch Arrowhead Stitch Decorative Stitch Parallelogram Stitch — Decorative Stitch — Scallop Stitch — Decorative Stitch — Lightning Stitch — Link Stitch — Square Stitch — Decorative Stitch — Decorative Stitch — Decorative Stitch — Decorative Stitch 8 30 25 13 31 26 14 32 27 15 33 16 34 17 35 18 36 19 37 26 21 BUILT-IN STITCHES Feather stitching Use the Feather Stitch as a decorative top stitch when embroidering or when hemming blankets, tablecloths, or draperies. 1 Place the fabric right side up and sew 1 cm (3/8 inch) from the edge of the fabric. 2 Trim close to the stitching. The stitch will prevent the fabric from unravelling. Triple zigzag stretch stitching This stitch can be used wherever a zigzag stitch would be used to sew heavyweight stretch fabrics. The Triple Zigzag Stretch Stitch can also be used as a decorative top stitch. Decorative stitching These stitches can be used for decorative top stitching and for smocking. Refer to page 10 for the recommended stitch width and length of each stitches. Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] 37 27 Feather Stitch Fixed 2.5 (3/32) 3-5 (1/8-3/16) Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] 37 27 Triple Zigzag Stretch Stitch Fixed 2.5 (3/32) 3-5 (1/8-3/16) 24 19 21 16 Stitch Name Pattern Stitch Name Pattern 37 27 37 27 Scallop Stitch Decorative Stitch Bead Stitch Decorative Stitch Arrowhead Stitch Decorative Stitch Parallelogram Stitch — Decorative Stitch — Scallop Stitch — Decorative Stitch — Lightning Stitch — Link Stitch — Square Stitch — Decorative Stitch — Decorative Stitch — Decorative Stitch — Decorative Stitch 8 30 25 13 31 26 14 32 27 15 33 16 34 17 35 18 36 19 37 26 21 4 SEWING BUTTONHOLES AND BUTTONS CAUTION . Always turn off the machine before replacing the presser foot. Otherwise, injuries may occur if the foot controller is accidentally pressed and the machine starts sewing. Making a buttonhole (1-step automatic buttonhole) Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] Foot 1 F-1.5 3-5 Buttonhole Foot (1/64-1/16) (1/8-3/16) “A” Making a buttonhole is a simple process that provides reliable results. With the 1-step Automatic Buttonhole Stitch pattern, a buttonhole is sewn by automatically changing the sewing direction when the buttonhole lever and buttonhole foot are used. Note . When sewing a stitch pattern other than for a buttonhole, do not lower, touch or move the buttonhole lever, otherwise the stitching may become misaligned or sewn incorrectly. Memo . We recommend that you practice making a buttonhole on a scrap piece of fabric before you try it on an actual garment. . When making buttonholes on soft fabrics, place a stabilizer material on the underside of the fabric. ¦ Making a buttonhole 1 Using tailor’s chalk, mark the position and length of the buttonhole on the fabric. 2 1 1 Marks on fabric 2 Buttonhole sewing 2 Attach the buttonhole foot “A” and set the pattern selection dial to Buttonhole. 3 Open the button plate and insert the button. 1 1 Button plate 34 SEWING BUTTONHOLES AND BUTTONS SEWING BUTTONHOLES AND BUTTONS ¦ If the button does not fit in the button guide plate Add together the diameter and thickness of the button, and then set the button guide plate to the calculated length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).) 1 2 3 1 Presser foot scale 2 Length of buttonhole (Diameter + thickness of button) 3 5 mm (3/16 i...