Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Brother, модель Innov-is 4750D

Производитель: Brother
Размер: 9.66 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Note • If the screen is locked ( ), unlock the screen by pressing . While the screen is locked, no other key can be operated. SELECTING STITCH PATTERNS ¦ Stitch Selection Screens There are 9 categories of Character/Decorative stitch patterns. indicates that there is more than one stitch selection screen for that category. Decorative Stitch Patterns 7mm Decorative Stitch Patterns Satin Stitch Patterns 7mm Satin Stitch Patterns Cross Stitch Utility Decorative Stitch Patterns 4 Character/Decorative Stitches Alphabet Characters Alphabet Characters Alphabet Characters (Gothic Font) (Handwriting Font) (Outline) 117 SELECTING STITCH PATTERNS Selecting Decorative Stitch Patterns/7mm Decorative Stitch Patterns/Satin Stitch Patterns/ 7mm Satin Stitch Patterns/ Cross Stitch/Utility Decorative Stitch Patterns a Select the category of the pattern you want to sew. b Press the key of the stitch pattern you want to sew. * Press to view the next page. * Press to view the previous page. * To select a different stitch pattern, press . When the current stitch pattern is erased, select the new stitch pattern. > The selected pattern is displayed. Alphabet Characters a Press , or to select a font. b Press to change the selection screen, and then enter the characters that you want to sew. * To enter a space, press . * If you want to continue entering characters in a different font, press , and then repeat from step a. Memo There are three fonts for alphabet character stitching. SELECTING STITCH PATTERNS ¦ Deleting Characters a Press to delete the last character. Memo Characters are deleted individually starting with the last character entered. b Select the correct character. ¦ Character Spacing Adjustment a Press to display the setting screen. b Press to adjust character spacing. * Press to increase and press to decrease the character spacing. The setting range is from “00” through “10”. The default setting is “00”. Each setting equals a specific distance between characters. Value mm 00 0 01 0.18 02 0.36 03 0.54 04 0.72 05 0.9 06 1.08 07 1.26 08 1.44 09 1.62 10 1.8 Example: Memo Changing Character Spacing by this method, pertains to all characters. Spacing changes are valid not only while entering characters but also before and after the entering of characters. 4 Character/Decorative Stitches 119 SEWING STITCH PATTERNS SEWING STITCH PATTERNS Sewing Attractive Finishes To achieve attractive results when sewing character/decorative stitches, check the table below for the proper fabric/needle/thread combinations. Note • Other factors, such as fabric thickness, stabilizer material, etc., also have an effect on the stitch, so you should always sew a few trial stitches before beginning your project. • When sewing satin stitch patterns, there may be shrinking or bunching of stitches, so be sure to attach a stabilizer material. • Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. Fabric When sewing on stretch fabrics, lightweight fabrics, or fabrics with coarse weaves, attach stabilizer on the wrong side of the fabric. If you do not wish to do so, place the fabric on a thin paper such as tracing paper. a Fabric b Stabilizer c Thin paper N b caThread #50 - #60 Needle With lightweight, regular, or stretch fabrics: the Ball point needle (golden colored) With heavyweight fabrics: home sewing machine needle 90/14 Presser foot Monogramming foot “N”. Using another presser foot may give inferior results. Basic Sewing a Select a stitch pattern. b Attach monogramming foot “N”. c Place the fabric under the presser foot, pull the upper thread out to the side, and then lower the presser foot. d Press the “Start/Stop” button to start sewing. CAUTION • When sewing 7 mm satin stitch patterns and the stitches are bunched, lengthen the stitch length. If you continue sewing when the stitches are bunched, the needle may bend or break (see “Setting the Stitch Length” on page 49). SEWING STITCH PATTERNS Memo If the fabric is pulled or pushed during sewing, the pattern may not turn out correctly. Also, depending on the pattern, there may be movement to the left and right as well as front and back. Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. e Press the “Start/Stop” button to stop sewing. f Press the “Reverse/Reinforcement Stitch” button to sew reinforcement stitches. Memo • When sewing character stitches, the machine automatically sews reinforcement stitches at the beginning and end of each character. • When sewing is completed, trim any excess thread. Note • When sewing some patterns, the needle will stop in the raised position while the fabric is fed due to the operation of the needle bar separation mechanism which is used in this machine. At such times, a clicking sound different from the sound generated during sewing will be heard. This sound is normal and is not the sign of a malfunction. Making Adjustments Your stitch pattern may sometimes turn out poorly, depending o...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории