Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Press this key again to unlock the settings. S-18 d Needle mode selection key (Single/Double) Press this key to select twin needle sewing mode. The sewing mode changes between single needle mode and twin needle mode each time you press the key. If the key display is light gray, the selected stitch pattern cannot be sewn in the twin needle mode. B-45 e Sensor function key Press this key to use the sensor function. B-64 f Image key Press this key to display an enlarged image of the selected stitch pattern. S-22 g Machine’s memory key Press this key to select from 3 memory functions; retrieving, storing or reset. S-22, S-95, S-97 h “L/R SHIFT” key Shows the tendency of Left/Right of the center line of the original zigzag stitch currently selected stitch pattern. S-11 i Thread tension key Shows the automatic thread tension setting of the currently selected stitch pattern. You can use the plus and minus keys to change the thread tension settings. S-12 j Clock key Press this key to set the clock to your local time. B-20 Basic operations B-23 LCD SCREEN No. Display Key Name Explanation Page k Presser foot/Needle exchange key Press this key before changing the needle, the presser foot, etc. This key locks all key and button functions to prevent operation of the machine. B-49 to B-51 l Sewing machine help key Press this key to see explanations on how to use the machine. B-30 m Machine setting mode key Press this key to change the needle stop position, change the volume of operation sound, adjust the pattern or screen, and change other machine settings. B-25 n Stitch width and stitch length key Shows the zigzag width and stitch length settings of the currently selected stitch pattern. You can use the plus and minus keys to adjust the zigzag width and stitch length settings. S-10 o Guideline marker key Press this key to display the guideline marker along the sewing line. The guideline marker makes it easier to sew stitches that align with the fabric edge or other marker on the fabric. S-14 p Mirror image key Press this key to create a mirror image of the selected stitch pattern. If the key display is light gray, a mirror image of the selected stitch pattern cannot be sewn. S-21 q Automatic thread cutting key Press this key to set the automatic thread cutting function. Set the automatic thread cutting function before sewing to have the machine automatically sew reinforcement stitches at the beginning and end of sewing (depending on the pattern, the machine may sew reverse stitches) and trim the threads after sewing. S-13 r Automatic reverse/reinforcement stitch key Press this key to use the automatic reverse/reinforcement stitching setting. If you select this setting before sewing, the machine will automatically sew reverse stitches or reinforcement stitches depending on the pattern, at the beginning and end of sewing. S-5 s Free motion mode key Press this key to enter free motion sewing mode. The presser foot is raised to an appropriate height and the feed dog is lowered for free motion quilting. S-40 t Pivot key Press this key to select the pivot setting. When the pivot setting is selected, stopping the machine lowers the needle and slightly raises the presser foot automatically. In addition, when sewing is restarted, the presser foot is automatically lowered. • If this key appears as , the pivot function cannot be used. • Be sure the needle position on page B-26 of Machine Settings is set to the down position. S-15 For additional operational information, refer to page reference number listed above. LCD SCREEN Using the Machine Setting Mode Key Press to change the default machine settings (needle stop position, opening display, etc.). B 1 Memo • Press or next to the page numbers, to display a different settings screen. Getting Ready f a i g j b k l c h d e m m m a Select whether to use the sewing speed controller to determine the zigzag width (see page S-39). b Make adjustments to character or decorative stitch patterns (see page S-82). c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.) d Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at “3” for normal sewing.) (see page S-17) If the dual feed foot is installed and its roller is lowered, the pressure setting is fixed at “2” and cannot be changed. e Fine tune the feed of the dual feed foot (see page B-54). f Select whether “1-01 Straight stitch (Left)” or “1-03 Straight stitch (Middle)” is the utility stitch that is automatically selected when the machine is turned on. (see page S-21) g Select whether “Utility Stitch” or “Quilt Stitch” displayed first on the stitch selection screen when the “Sewing” is selected. h You can activate this setting after connecting the optional multi-function foot controller. (These settings are not operable unless the optional multi-function foot controller is attached to the machine.) i Change the height of the presser fo...