Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Specifications subject to change without notice TYPICAL SEWING MACHINE WANPING MACHINERY CO.,LTD. ADD: WANPING TOWN, WUJIANG CITY, JIANGSU PROVINCE, CHINA TEL: +86-512-63391278 FAX: +86-512-63391371 POST. CODE: 215223 Http://E-mail:export@typicalwpchina.com Printed in DEC 2007 „” ./: (495) 989-22-97CONTENTS CONTENTSCONTENTS Operation instruction Operation instructionOperation instruction 1 Brief introduction 2 Main specifications 3 Installation and operation preparation 4 Needle 5 Lubrication 6 Thread 7 Winding the bobbin thread 8 Installing the bobbin 9 Threading the needle thread 10 Adjusting the tension of needle thread and bobbin thread 11 Adjusting the stitch length 12 Adjusting the presser foot pressure 13 Reverse stitching 14 Adjusting the feeding 15 Adjusting the feed dog 16 Adjusting the timing between needle and hook 17 Adjusting the height of needle bar 18 Adjusting the bobbin case opener 19 Adjusting the height of presser foot 20 Adjusting the timing of vibrating presser foot 21 Adjusting the presser foot movement amount 22 Adjusting the thread controller spring 23 Replacing the timing belt 24 Safety clutch mechanism 25 Adjusting the bobbin thread winder 26 Adjusting the hook oil amount 27 Installing the pedal Parts manual Parts manualParts manual 1 Casting components 2 Upper shaft and thread take-up components 3 needle bar rocking frame and upper feed components 4 Feed components 5 Hook components 6 Thread tension components 7 Accessories 1 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 8 8 9 9 9 10-12 34 1-1 56 1-1 17-18 19-20 21 22 - 3 2 -24 „” ./: (495) 989-22-971.Brief introduction 2.Main specifications This series machines adopt sliding type take~up lever mechanism, compound feed with needle feed, bottom feed and alternating presser feet and link type feeding mechanism. Driven by timing belt and extra large hook is installed to form seam #301. These machines have the large working space and high lifting height of presser foot so it's suitable for sewing large products. Suitable for stitching tents, canvas, rubber products, heavy leather and furniture 3.Installation and operation preparation(Fig.1) 1 2Model Applications Max Sewing Speed Max Stitch length Needle Number Presser foot lift height Needle Working space Bed size Motor power Needle gauge TW1-28BL30 TW1-8BL30 TW1-28BL20 TW1-8BL20 1000s.p.m 10mm 20mm DY 3 24# 26#(standard26# Extra heavy weight materials 550W 4P 508mm 153mm762mm 153mm 1100mm 230mm 846mm 230mm Support rod 800s.p.m 1 11/4" 1/2" 3/4" 1" 1 / " 1 / " 4 231 / " 2" 7/8"4Standard for 2 needle machine1/4" 2 1 2 1 1.Before test and operation, the places need to lubricated must be oiled, during the testing time, the lubrication should be more frequently. 2.The turn direction of the hand wheel must face to the operator. 3.Please don tr unatt hemax.s peedf oranewmachine, the 90% of the max. speed is acceptable. 4.Before install the machine on the table, please first uninstall the two support rods 4.Needle(Fig.2) 1.The standard needle type is DY 3(24#~26#) The right need should be choosed according to the thread and materials to be sewn 2.Install the needle: turn the hand wheel to lift the needle bar to its highest position,loosen the needle set screw, fully insert the needle shank up to the bottom of needle bar (single needle) or needle clamp(double needle),for single needle machine, keep the long groove leftward; for double needle machine, keep the long grooves of the two needles opposite with each other, then tighten the needle set screw. Single needle Double needle 3 5 4 1.Add 1-2 drops of oil in the places indicated by the arrows. 2.Put the oil indicator A out from the hook saddle, and fill oil in it until to the upper reference line. 3.Please lubricate at least twice every day if sewing continuously. 5.Lubrication(Fig.3) Usually, the ...
Эта инструкция также подходит к моделям:Швейные машинки - TW1-28BL20 det (3.9 mb)
Швейные машинки - TW1-8BL20 det (3.9 mb)
Швейные машинки - TW1-8BL30 det (3.9 mb)