Оценок - , средний балл: ( )

Инструкция по эксплуатации Bernina, модель 1632

Производитель: Bernina
Размер: 694.06 kb
Название файла: 1097_white-1632,-1788-x.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

This is a safety feature. If you are unable toinsert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the safetypurpose of the polarized plug. WHITE SEWING MACHINE COMPANY Record in space provided below the Serial No. andModel No. of this appliance. The Serial No. is located on Bed Plate. The Model No. is located on Rating Plate. Serial No. Model No. Retain these numbers for future reference. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always befolowed, including the following: Read all instructions before using(this sewing machine) DANGER To reduce the risk of electric shock: An appliance should never be left unattended when plugged in. Always unplug this appliance from the electric outlet immediately after using and before cleaning. Always unplug before relamping, Replace bulb with same type rated 15 watts. WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near children. 2. Use this appliance only for its intended use as described in this manual. Use onlyattachments recommended by the manufacturer as contained in this manual. 3. Never operate this appliance if it has a damaged cord or plug, if it is not workingproperly, if it has been dropped or damaged, or dropped into water, Return the appliance to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the appliance with any air openings blocked, Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth. 5. Never drop or insert any object into any opening. 6. Do not use outdoors. 7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 8. To disconnect, turn all controls to the off (‘O”) position, then remove plug fromoutlet. 9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle. ii. Always use the proper needle plate. The wrong plate can cause the needle to break. 12. Do not use bent needles. 13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break. 14. Unplug the sewing machine when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changingpresser foot, etc. 15. Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in theinstruction manual. SAVE THESE INSTRUCTIONS CONTENTS Name of Parts 1 Accessories 2 Removing the extension table 3 Before swing (Power supply and Sewing lamp) Fitting shank and quilting seam guide. Fitting of presser feet 4 5 Winding the bobbin 6 Removing bobbin case and bobbin 7 Inserting bobbin into bobbin case 7 Inserting bobbin case into shuttle race 8 Changing needle Threading upper thread & Twin needle threading 98 Drawing up bobbin thread 10 Changing sewing directions 10 Adjusting.thread tensions 11 Regulating the presser foot pressure 12 Darning plate 12 Fabric. Thread, Needle guide 13Sewing (pattern selector) and operation table 14 To start sewing to finish a seam 15 Straight stitch zig zag stitch 16 Blind hemming 17 Three step zig-zag 18 Overcasting edges-binding 19 Straight stretch stitch 20 Sewin’ on buttons 21 Sewing in zips 22 Button hole sewing 23 Hemming 24 Twin needle-freehand embroidery 25 Cleaning of race.and shuttle hook 26 Cleaning and oiling 27 Trouble shooting guide 28 NAME OF PARTS (FRONT SIDE) 1 Pattern selector dial 2 Take up lever 3 Tread tension dial4 Tread guide for upper threading 5 Presser foot 6 Shuttle cover 7 Zigzag Width Dial 8 Spoolpiri 9 Top cover 10 Stitch length dial1 1 Reverse button 12 Face cover 13 Handle —1— (REAR VIEW) Bobbin winder spindle Bobbin winder stopper Upper thread guide Stop Motion knob Hand wheel Thumb screw Needle plate Needle clamp screw Presser foot lever Extension table Accessories Box 1A— REMOVING EXTENSION TABLE :s:stt:: : THIS IS ONLY APPLICABLE TO MACHINES MANUFACTURED FOR THE UNITED KINGDOM IMPORTANT The wires in this mains lead ar, coloured in accordance with the following code: BLUE NEUTRAL — BROWN LIVE — NOTE. As the colours of the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceeo as follows: Connect BROWN wire to terminal marked L or coloured RED. Connect BLUE wire so terminal marked N or coloured BLACK. FIT CORRECT PLUG TO POWER CORD WHEN USING A BS. 1363 FUSED PLUG. A 3 AMP. FUSE MUST BE FITTED. If the terminals of the plug are unmarked consult a qualified electrician before use. Vikien leaving the sewing...