Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
This could hurt you. This means you should be careful because long hair can become entangled in the cutting head. This could hurt you. This means be careful of ties and other loose clothing which could become entangled in the cutting head. This could hurt you. This means you should be careful of loose jewelry which could become entangled in the cutting head. This could hurt you. This means do not allow children to use the shredder. eLeCTrICAL SAFeGUArdS • Unplug your shredder before moving it, emptying the bag, or when it is not in use for an extended period of time. • Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been damaged in any manner. • Do not overload electrical outlets beyond capacity as this can result in fire or electrical shock. • The socket-outlet should be installed near the equipment and shall be easily accessible. • Do not alter attachment plug. Plug is configured for the appropriate electrical supply. • Do not use near water. • Keep out of the reach of children. • Do not use extension cords to connect this product to the power supply. SerVICe Do not attempt to service or repair the unit yourself. If your shredder should require service, contact your local dealer or call GBC National Service at 800-790-7787. Please have the model and serial number of your shredder ready when calling. English Figure 3. 0V / 0A min. Figure 1. Figure 2. Figure 1. The door must be closed when operating the shredder. Figure 2. Keep the area around the electrical outlet clear. Unplug the shredder before cleaning it. do not perform any repairs on the shredder. (See page 12). Figure 3. Do not shred CDs or DVDs in the cross cut model (7550X). It may splinter disks and kick them back out. Only the straight cut model (7500S) is suitable to destroy CDs or DVDs. Do not attempt to shred paper clips with the cross cut model. Figure 4. Figure 4. Do not operate the shredder without the safey guard in place. Figure 5. The shredder turns off after one hour of inactivity. Turn the power switch off when not in use for extended times. Figure 5. English Set Up A2.1. Figure 6. Figure 7. ASSembLy Figure 6. 1. Plastic bag a. Pull out the waste receptacle frame and remove the round belt from around the frame. b. Insert the included plastic bag through the pull-out frame and fold the top of the bag over the frame. c. Secure the bag with the round belt. d. Slide the waste receptacle in and close the cabinet door. 2. Oiler a. Hook the oiler holder over the edge of the cabinet. b. Remove the sticky tape from the oil tube. c. Remove the cap from the oil bottle, insert the oil tube into the bottle, and tighten the cap. d. Place the oil bottle in the holder. The oil bottle has a fill level indication (A). Figure 7. Plug cord into the electrical outlet. Keep the area in front of the outlet clear for easy access. Operation AABFigure 8. Figure 9. OILer Figure 8. When using for the first time or when the oil bottle is changed: • Press until the EMPTY LED (A) no longer blinks red. Figure 9. Flashing INJeCT Led: • Indicates cutting shafts are being automatically oiled. Flashing emPTy Led: • Indicates oil bottle is empty. English A2.1. Figure 10. Figure 11. OPerATING The Shredder Figure 10. 1. Press the forward button to turn the shredder on. The green light shows that the shredder is ready to operate. 2. Feed paper in to the middle of the the throat. An auto sensing photo cell detects the paper and starts the machine. The shredder stops automatically when no more paper is inserted. STANdby mOde After one hour of inactivity, the shredder goes into standby and the green LED turns off. Repeat step 1 above to turn the shredder back on. SheeT CAPACITy INdICATOr Figure 11. The shredder has an ECC (electronic capacity control) which indicates the sheet capacity being used during shredding (A). red Led (A). The shredder stops automatically if too much paper is inserted. The paper is reversed. yellow Led (b). Maximum sheet capacity during shredding. Green Led (C). Normal capacity during shredding. Figure 12. Figure 13. Figure 12. Shredder stops automatically when door is opened and a red LED indicator lights. ...
Эта инструкция также подходит к моделям:Шредеры - 7550X (2.8 mb)