Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
This could hurt you. ? 0 This means be careful of ties and other loose clothing which could become entangled in the cutting head. This could hurt you. This means you should be careful of loose jewelry which could become entangled in the cutting head. This could hurt you. • Unplug your shredder before moving it or when it is not in use for an extended period of time. • Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been • Do not overload electrical outlets beyond capacity as this can result in fire or electrical shock. • The socket-outlet should be installed near the equipment and shall be easily accessible. • Do not alter attachment plug. Plug configured for the appropriate electrical supply. Do not attempt to service or repair the unit yourself. In the rare event that your unit requires service contact your dealer or call GBC National Service at 1-800-790-7787. Please have the model number and serial number ABC Office 800.658.8788 GQC |T] FIGURE 1 FIGURE 2. FIGURE 3. SET UP-FIGURE1, 2 & 3 To protect against damage your shredder has been shipped in two parts, the shredder head (FIGURE 1 .A) and the cabinet (FIGURE 1 .B). A Caution! Shredders are heavy equipment (see “Shredder Mead Weight’ in the “Specifications" section of this Manual). To insure proper installation and avoid injury, GBC recommends that two people set up this unit. Use care not to pinch your fingers between the shredder head and cabinet. Handle shredder head as illustrated. 1. Using the hand grips (FIGURE 2.A) provided, place the shredder head onto the top of the cabinet. The control panel may face toward the front or back of the cabinet. 2. Open the door by pressing on the door knob (FIGURE 2.B) and place the hand grips (FIGURE 3.A) into the holes found in the cabinet floor (FIGURE 3.B). 3. Remove the wire bag rim and place one of the shred bags onto the rim. Slide the rim with bag back into the cabinet. Close the cabinet door. 4. Connect the power cord to a standard, single phase socket. Fuse: 15 Amp. Max. 5. After reading the operating instructions, slide them Into the holder (FIGURE 3.C) and close the door. Your shredder is ready for use! OPERATION-FIGURE 4. Press the rocker switch (A) to the Power ON "I" position. When the shredder is properly set up with cabinet door fully closed, the Power ON 'I' light (B) will illuminate. You are now ready to shred! To shred simply insert paper into the throat of the unit. Once your document has activated the automatic on feature, the unit automatically will start and then will stop once your document Is shredded. BIN FULL S In order to prevent shreds from backing up into the cutters and jamming your shredder, this unit features an automatic bin full shut off. Once the shred bin is full, the unit will shut off automatically and the bin full light (C) will illuminate. You can now either compact the shreds and continue shredding, or empty the ...
Эта инструкция также подходит к моделям:Шредеры - 6120S (1003.26 kb)
Шредеры - 7120S (1003.26 kb)
Шредеры - 7160X (1003.26 kb)