Оценок - 4, средний балл: 3.8 ( )

Производитель: GBC Размер: 823.73 kb Название файла: Язык инструкции:

Do not connect this unit to electrical power or attempt to operate it before you have read these operating instructions. Save these instructions for later use. ! The following two warnings are found on the bottom of the product: This safety message means that you could be This safety message means that you could be seriously hurt or killed if you open the product seriously hurt if you place your hands in the and expose yourself to hazardous voltage. discharge shoot. The following ISO and IEC symbols appear on this The symbols which become illuminated are: product, and their meanings are as follows: Means Power ON Means the shred bin is full Means Power ON Means OFF Means the cabinet door is open R Means REVERSE Means an overload has occurred R Depress the "R" side of the rocker switch This means you should be careful because long hair can become entangled in the cutting head. This could hurt you. This means don’t reach into the feed opening of the cutting head. This could hurt you. This means be careful of ties and other loose clothing which could become entangled in the cutting head. This could hurt you. This means you should be careful of loose jewelry which could become entangled in the cutting head. This could hurt you. ELECTRICAL SAFEGUARDS • Unplug your shredder before moving it, emptying the shred bag, or when it is not in use for an extended period of time. • Do Not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been damaged in any manner. • Do NOT overload electrical outlets beyond capacity as this can result in fire or electrical shock. • The socket-outlet should be installed near the equipment and shall be easily accessible. • Do NOT alter attachment plug. Plug configured for the appropriate electrical supply. 0 3 FIGURE 1.B. FIGURE 3. FIGURE 2. FIGURE 1.A. A B C A B D E SET UP-FIGURE 2.A. Caution! Shredders are heavy equipment (see “Shredder Head Weight” in the “Specifications” section of this Manual). To insure proper installation and avoid injury GBC recommends that two people set up this unit. To protect against damage your shredder has been shipped in two parts, the shredder head (A) and the cabinet (B). ! FIGURE 1.A. ! Caution! Use care not to pinch your fingers between the shredder head and cabinet. Handle shredder head as illustrated. FIGURE 1.B. Open the cabinet door fully, lift the shredder head by the outside front and back edges using two people on each side. Angle the shredder head slightly downwards from the front and lower onto the cabinet. Once properly installed, a uniform gap of approximately a 1/4" will be visible from the front. FIGURE 2. Remove the wire bag rim and place one of the starter bags onto the rim. Slide the rim with bag back into the cabinet. Close the cabinet door. Your shredder is ready for use! OPERATION-FIGURE 3. ! Connect power cord to an appropriate power source. Press the rocker switch (A) to the on "I" position. When the shredder is properly set up with c...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: