Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Fellowes, модель 120C-2

Производитель: Fellowes
Размер: 104.52 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. • Unplug shredder and remove wastebasket drawer (A). – Carefully clear any paper shreds that have collected on under side of paper entry (C). CAUTION: Models 120C-2/C-120C (confetti cut model) has exposed blades.Use care when removing paper shreds on underside of paper entry. To clear a paper jam If paper jam light (J) is on, follow these steps until light turns off. • Check the waste basket and empty if full. • Press and hold control switch (E) in the reverse [R] position to back paper out of paper entry (C). Try pulling gently on paper to remove it from shredder. • Alternate between forward and reverse, if needed: – Press and hold Turbo Jam Release Button (G) for a few seconds. – Press and hold control switch (E) in the reverse [R] position for a few seconds. – Continue alternating between forward and reverse until the jam clears. CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. Maintenance Empty waste basket regularly to ensure the smooth functioning of the cutting cylinders. The shredder will not operate when the basket is full. Oil confetti- cut model (120C-2/C-120C) regularly to ensure proper operation. If used at or near daily capacity, apply oil every time you empty the basket. Use Fellowes Powershred Lubricant # 35250 or other non-aerosol vegetable- based oil in a long-nozzle container (sample oil provided) . CAUTION: Do not use flammable synthetic oil, petroleum-based lubricants of any kind. To oil the cutting cylinders • Apply oil over full width of cutting cylinders • Press and hold the Turbo Jam Release Button (G) for at least • Press and hold the control switch (E) • Repeat the forward/reverse sequence 4 5 Troubleshooting If there is a problem with your shredder, check these symptoms and remedies. If you cannot solve the problem, call your local dealer or contact Fellowes directly. Do not open shredder head to attempt repair. You could be exposed to serious electric shock and will void the warranty. Symptom Remedy Ready Light (F) will not light Make sure shredder is plugged in and the control switch (E) is in the automatic [I] position. Shredder does not start or stops while • Make sure shredder is plugged in and shredding control switch (E) is in the automatic [I] position. • Shredder is jammed. Follow the instructions under Operation. Basket ajar light (H) is on Make sure the waste basket drawer (A) is all the way into the cabinet. Basket full light (I) is on Empty the waste basket. Follow the instructions under Operation. Paper jam light (J) is on Clear the paper jam. Follow the instructions under Operation. Confetti- cut shredder (120C-2/C-120C) Oil the cutting cylinders. Follow the Shredder sheet capacity decreases, noise instructions under Maintenance. level increases, or cutting cylinders stop with a squeak or rubbing sound Shredder runs for a few seconds after the No action required. This is a self- cleaning paper has cleared the cutters function. Supplies The following items for the 120-2/C-120 and 120C-2/C-120C shredders are available from Fellowes: Item Quantity Part Number Waste bags (in dispenser) 50/roll 36054 Waste basket (box) 1 box 400008 Powershred Lubricant (120C-2/C-120) 12 oz. bottle 35250 To purchase supplies, contact Fellowes at the appropriate location page of this instruction manual, Fellowes conducts extensive testing to ensure that these shredders are capable of meeting all of the specifications listed in the Product Profile (see page 2). However, the actual sheet capacity is dependent on a number of factors including the type and weight of paper, the humidity, the voltage level of the power source, the temperature of the motor, and the care with which the operator feeds the paper. Safety agency testing is conducted to ensure that the shredder will operate to specifications even if the available voltage is 10% below or 6% above the rated voltage. During this testing 2.5 minutes was taken to empty the basket each time it filled and the following capacities were used for temperature rise testing: Cut Size Number Paper Size Voltage Hertz & Type of Sheets & Weight 220-240VAC 50HZ 3.9mm Strip Cut 17 A4 70g. 220-240VAC 50HZ 5.8mm Strip Cut 19 A4 70g. 220-240VAC 50HZ 3.9mm Confetti Cut 13 A4 70g. 120V 60Hz 5.8mm Strip Cut 19 8.5x11 20 lb. 120V 60Hz 3.9mm Confetti Cut 13 8.5x11 20 lb. 100V 50/60Hz 3.9mm Strip Cut 17 A4 70g. 100V 50/60Hz 3.9mm Confetti Cut 13 A4 70g. Warranty Fellowes, Inc. (“Fellowes") warrants the cutting cylinders of the machine to be free from defects in material and workmanship for 20 years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. If any part is found to be defective during the warrant period, your sole and exclusive remedy wil...

Эта инструкция также подходит к моделям:
Шредеры - 120-2 (104.52 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории