Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
To release the upper blade gently push to the right approximately ^” and lift up. • Place the matD backstop to the correct position. • Press the blade down slowly. The clamp will then automatically hold the material to be cut in place. • After the cutti to the right ^”, dropping the blade down slightly and then pushing the handle slightly back to the left. If you have any questions, please call a Customer Service Representative at (800) 658-8788. P9D4HLE abcoffice (800) 658-8788...
Эта инструкция также подходит к моделям:Шредеры - 15E (157.55 kb)
Шредеры - 18E (157.55 kb)