Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
..........Warning! Non-compliance with the instructions may cause damage to the machine. The operating instructions must always be available for the operator. All components which may endanger the operator are covered by a guard or have a door. The guard is screwed on and the door has a switch. Operation by one person at a time only. 1.2 Application The machine is constructed for shredding crumpled paper, stacks of paper and cardboard boxes (including staples). Due to reasons of disposal shredding of plastic foils amongst the paper should be avoided. Danger! Children must not operate the machine. Danger! Do not shred any strapping materials or fluids or materials which may explode, chemically react or splinter. Warning! Feeding of big steel components, screws, nails or hard components will damage the cutting mechanism. 4 1-800-658-8788 -2. Installation The machine is mobile on castors. The machine must be installed on a sturdy, dry, and level floor. Oil level must be visible in the sight glass (2) IDEAL 4109 version. Danger! -The machine may not be installed outside. -Do not use in the vicinity of flammable liquids or gases. -Do not use in humid environments. -Protect the power cable from extreme heat, oil, and sharp edges. -Consider the floor loading. Weight with press approx. 900 kg (1990 pounds). Warning! -Do not cover the ventilation slits (3). 2.1 Pre-assembly -Fix the side tables (4) and (5) to the machine. 5 IDEAL 4107; IDEAL 4109 IDEAL 4107; IDEAL 4109 2.2 Power supply The name plate is located at the rear of the machine. -Data stated on the name plate - Voltage “ V “, -Frequency “Hz”, -Power consumption “A” must correspond to the values of the power supply unit. -Earth wire must be available. -Connect the machine to the mains. 2.3 Checking rotating direction Operate the machine for a short time as described under 3. “Operation“.. -The material is transported to the shredding mechanism by a conveyor belt. Warning! Switch off the machine immediately at the main switch if the conveyor belt runs in the opposite direction. When the conveyor belt runs in the opposite direction: The machine is wired according to the IEC standardized rotary field. When changing the rotary direction we recommend that this is performed by an experienced specialist. The rotary direction is changed by exchanging the “L1“ and “L2“ connections in the plug. Danger! Incorrect exchanging of connections may endanger the operator. If in doubt, this work should be performed by an electrical specialist. 6 1-800-658-8788 -3. Operation Danger! The machine may only be operated by persons who have read and understood the operating instructions. Danger! Do not reach into the running shredding mechanism! The shredding mechanism may cause serious injury! Danger! The machine will only run when the door is closed. 3.1 Operating elements IDEAL 4107 (1) Start (2) Stop (3) Reverse switch and lamp showing “bag full“ (4) Key switch (5) Standby (6) Mains...
Эта инструкция также подходит к моделям:Шредеры - IDEAL 4107 CC (508.82 kb)
Шредеры - IDEAL 4109 CC (508.82 kb)
Шредеры - IDEAL 4109 (508.82 kb)
Шредеры - IDEAL 4107 CC (508.82 kb)