Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
The ventilation slots must not be blocked or covered and they must be at a distance of at least 5 cm away from walls or furniture. • Make sure no liquid is spilled on or in the paper shredder. • Read the operating instructions before switching on the document shredder. Save these instructions for later use. • Follow all warnings and instructions marked on the product! Risk of injury! Do not reach into the paper feed slot. Risk of injury from being pulled in! Keep long hair, loose articles of clothing, ties, scarves, jewellery, etc. away from feed opening. Material with the tendency to form loops, e.g. tapes, strapping material, etc. must not be shredded. Danger of injury by splinters! Feed CDs through the slot in the safety element only. 1 Proper use, warranty 2 Safety instructions Translation of the original operating instructions english The shredder is designed exclusively for destroying paper. Depending on the cutting type, it can also handle small quantities of the following materials: Shred width (mm) 3.9 5.8 1.9x15 4.5x30 Credit and charge cards .... CDs .. Its sturdy drive mechanism is not damaged by paper clips and staples. The warranty period for the document shredder is 2 years. In addition, there is a 10 year guarantee on the solid steel blade rollers. This warranty and guarantee exclude wear and damage caused by improper handling or actions taken by third parties. Keep paper shredder out of the reach of children. Do not let the shredder run if the person using it is not present. Switch the shredder off and disconnect it from the mains if it is damaged, not working correctly or before relocating or cleaning it. Service work may only be carried out by HSM Customer Service or by the service technicians of our contractual partners. • Make sure the mains plug is easily accessible. • Before plugging in the mains plug, check that the voltage and frequency of your local mains supply correspond to those stated on the type plate. • This paper shredder should never be placed near or over a radiator or heat source. The ventilation slots must not be blocked or covered and they must be at a distance of at least 5 cm away from walls or furniture. • Make sure no liquid is spilled on or in the paper shredder. • Read the operating instructions before switching on the document shredder. Save these instructions for later use. • Follow all warnings and instructions marked on the product! Risk of injury! Do not reach into the paper feed slot. Risk of injury from being pulled in! Keep long hair, loose articles of clothing, ties, scarves, jewellery, etc. away from feed opening. Material with the tendency to form loops, e.g. tapes, strapping material, etc. must not be shredded. Danger of injury by splinters! Feed CDs through the slot in the safety element only. 1 Proper use, warranty 2 Safety instructions Translation of the original operating instructions 0804 9 english 3 Machine components Operating and display elements Reverse button Display options: Container full Cutting unit blocked Door open Ready for operation Operation button Switching on the shredder • Press the operation button. ..The “Ready for operation” indicator lights up. Shredding paper • When you feed paper, the light barrier automatically starts the cutting unit. ..Two seconds after the light barrier in the paper feed opening is free again, the cutting unit is switched off automatically and the shredder switches to standby. Note: You can fold the safety element upwards to shred larger quantities of paper. This makes it easier to access the feed opening. Shredding CDs (only in cut size: 3.9 mm, 5.8 mm) • Switch the shredder to permanent mode: Press the operation button for four seconds. • Only feed the material into the insertion slot of the safety element (splinter protection). • Switch off permanent mode: Press the operation button. Note: To completely separate the materials shredded, you can insert the CD bag supplied. Shredding credit cards Feed the cards through the CD slot when the cut size is 3.9 mm and 5.8 mm. For other machines, use the opening for paper. Switching off the shredder • Press the operation button. ..The “Ready for operation” indicator goes out. 4 Operation 7 2 5 4 1 8 3 6 1 Safety instructions 2 Feed opening for CDs 3 Safety element / splinter protection 4 Operating and display unit 5 Name plate 6 Door 7 Feed opening for paper and credit cards 8 Light barrier english 3 Machine components Operating and display elements Reverse button Display options: Container full Cutting unit blocked Door open Ready for operation Operation button Switching on the shredder • Press the operation button. ..The “Ready for operation” indicator lights up. Shredding paper • When you feed paper, the light barrier automatically starts the cutting unit. ..Two seconds after the light barrier in the paper feed opening is free again, the cutting unit is switched off automatically and the shredder switches to standby. Note: You can fold the safety element upw...