Оценок - 2, средний балл: 4 ( )

Производитель: Bosch Размер: 2.37 mb Название файла: Язык инструкции:

A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust- related hazards. -2 BM 1609929J65 02-08 2/20/08 11:30 AM Page 3 BM 1609929J65 02-08 2/20/08 11:30 AM Page 3 Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely control the power tool. Power tool use and care Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched or safety guard return springs may be improperly mounted. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts. Risk of injury to user, power cord must only be serviced by a Bosch Factory Service Center or Authorized Bosch Service Station. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Angle Grinder Safety Rules Always use proper guard with grinding or against your body is unstable and may wheel. A guard protects operator from lead to loss of control. broken wheel fragments. When using Accessories must be rated for at least the grinding wheel attachments, the guard must speed recommended on the tool warning always be attached to the tool and positioned label. Wheels and other accessories running for maximum safety, so the least amount of over rated speed can fly apart and cause wheel is exposed from the side the tool is injury. Grinding wheels or any other being operated. accessory must have a maximum safe Use clamps or other practical way to operating speed greater than the “no load secure and support the workpiece to a RPM” marked on the tool’s nameplate. stable platform. Holding the work by hand -3 BM 1609929J65 02-08 2/20/08 11:30 AM Page 4 BM 1609929J65 02-08 2/20/08 11:30 AM Page 4 Hold tool by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Always use auxiliary handle for maximum control over torque reaction or kick-back. Operation of the grinder without the side handle could cause loss of control of the grinder, resulting in possible serious personal injury. Before using a grinder or installing a new wheel, inspect the grinding wheel for chips and cracks. Remove bad wheels immediately. Run the tool at no load for one minute, holding the tool in the direction away from people. Wheels with flaws will normally break apart during this time. Carefully handle both the tool and individual grinding wheels to avoid chipping or cracking. Install a new wheel if tool is dropped whi...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: