Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING – When using tools, basic precautions should always be followed, including the following: General a. To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Work area a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. b. Do not operate the Air Angle Die Grinder in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The Air Angle Die Grinder is able to create sparks resulting in the ignition of the dust or fumes. c. Keep bystanders, children, and visitors away while operating the Air Angle Die Grinder. Distractions are able to result in the loss of control of the tool. Personal safety a. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons. b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts. c. Avoid unintentional starting. Be sure the switch is off before connecting to the air supply. Do not carry the Air Angle Die Grinder with your finger on the switch or connect the tool to the air supply with the switch on. d. Remove adjusting keys and wrenches before connecting an air hose to the Air Angle Die Grinder on. A wrench or a key that is left attached to a rotating part of the tool increases the risk of personal injury. e. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. f. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use. g. Always wear eye protection. Wear ANSI- approved safety goggles. h. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. i. Risk of Electric Shock. This Air Angle Die Grinder is not provided with an insulated gripping surface. Contact with a .live. wire will also make exposed metal parts of the tool .live. and shock the operator. j. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. k. Explore the workpiece to avoid contact with hidden wiring. Thoroughly investigate the workpiece for possible hidden wiring before performing work. Contact with live wiring will shock the operator. Tool use and care a. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and is able to lead to loss of control. b. Do not force the tool. Use the correct tool for the application. The correct Air Angle Die Grinder will do the job better and safer at the rate for which the tool is designed. c. Do not use the tool if the switch does not turn the tool on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. d. Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the Air Angle Die Grinder unintentionally. Turn off and detach the air supply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off position before leaving the work area. e. Store the Air Angle Die Grinder when it is idle out of reach of children and other untrained persons. A die grinder is dangerous in the hands of untrained users. f. Maintain the tool with care. A properly maintained tool is easier to control. g. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the Air Angle Die Grinder serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged. h. Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons. Service a. Tool service must be performed only by qualified repair personnel. b. When servicing the Air Angle Die Grinder, use only identical replacement parts. Use only authorized parts...