Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Use personal protective equipb. ment. Always wear ANSI-approved safety eye protection and a dust- mask/respirator. Safety equipment such as non-skid safety shoes, a hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Do not allow children to use this c. Compact Belt Sander. This power tool is not a toy and should not be operated by any child, or untrained user, at any time. Severe abrasion hazard. d. Keep hands and fingers clear of moving sanding belts, and do not let your fingers rest over the front or right edge of the Compact Belt Sander. If the sanding belt should run off, or if it is not properly adjusted, your fingers could come in contact with the moving belt possibly causing serious personal injury. Severe pinching hazard. e. Keep hands and fingers clear of front roller at all times. Failure to do so may result in fingers being pinched and/or other personal injury. WARNING! To reduce the risk of injury, always secure work to prevent it from being thrown back towards the user. Hold this Compact Belt Sander by f. the insulated gripping surfaces when performing a job near electrical wiring. This will help keep you safe if electrical contact is made. Clean this Compact Belt Sander g. frequently to prevent buildup of debris on moving parts. Built up debris may fly from the power tool causing personal injury. Prevent unintentional starting. h. Ensure the switch is in the off- position before connecting to your power source, picking up or carrying the tool. Carrying this Compact Belt Sander with your finger on the switch or energizing it while the switch is in the “ON” position invites accidents. Do not overreach. Keep proper i. footing and balance at all times. This enables better control of the Compact Belt Sander in unexpected situations. Dress properly. Do not wear j. gloves, loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Gloves, loose clothes, jewelry or long hair can be caught in moving parts causing serious personal injury. If devices are provided for the conk. nection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust- related hazards. Only use safety equipment that l. has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Power tool use and care:4. Do not force this Compact Belt a. Sander, and always use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use this Compact Belt b. Sander if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the c. power source before making any adjustments, changing accessories, or storing. Such preventive safety measures reduce the risk of accidental starting. Avoid unintentional starting. d. Prepare to begin work before turning on the Compact Belt Sander. Do not lay the Compact Belt e. Sander down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control. When using a handheld power f. tool, maintain a firm grip on the tool with both hands to resist starting torque. Do not leave the tool unattended g. when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. Use this Compact Belt Sander in h. accordance with these instructions, taking into account the working conditions and the work to be performed. Use for operations different from those intended could result in a hazardous situation. Store the idle Compact Belt Sander i. out of the reach of children and do not allow persons unfamiliar with it, or these instructions to operate. Power tools are dangerous in the hands of untrained users. Service:5. Maintain this Compact Belt a. Sander. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect a safe operation. If damaged, have the Compact Belt Sander repaired before use. Many accidents are caused by poor maintenance. Have your power tool serviced by b. a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Maintain labels and nameplates c. on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. WARNING! People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone. • Do not use with power switch locked on. • Properly mai...