A.2.4.1 Hard-Disk Image Files Table 15-3 shows hard-disk image files present in the simulator. These images can be found in the simulators "/image" folder (see Section 2.3, "Directory Structure and Executable", on page 4). File name Description Bare-4gig.hdd 4-GB bare hard disk image. Bare-8gig.hdd 8-GB bare hard disk image. Table 15-3: Hard-Disk Images A.2.4.2 Memory SPD Files When a computer is booted (started), serial presence detect (SPD) is information stored in an electrically erasable pro

OUTSB 6E Output the byte in DS:rSI to the port specified in DX, and then increment or decrement rSI. OUTSW 6F Output the word in DS:rSI to the port specified in DX, and then increment or decrement rSI. OUTSD 6F Output the doubleword in DS:rSI to the port specified in DX, and then increment or decrement rSI. POP reg/mem16 8F /0 Pop the top of the stack into a 16- bit register or memory location. POP reg/mem32 8F /0 Pop the top of the stack into a 32- bit register or memory location. POP reg/mem64

A NAMUR amplifier with a relay output can be supplied as an optional element. OPERATION The indicator needle moves together with the vane mounted on its shaft. When the vane enters into the slot of the detector, the limit switch changes its state. The detector, is mounted on a support which includes an indicator on the scale, that shows the switching position. This support is guided by the scale plate slot. SWITCHING POINT ADJUSTMENT To gain access to the limit switch inside the indicator housin