Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The Dual PC Modem is perfect for the home office or small business. If you want to take your computing to the next level, the Actiontec Dual PC Modem is one of the keys to your success. Package Contents • Actiontec Dual PC Modem • Power adapter • Ethernet cables (2) • Phone cord • Installation CD • Quick start guide • Start Here guide • User name addendum • Warranty and registration card Minimum System Requirements • Internet service • Computer with an 10 Mbps or 10/100 Mbps Ethernet connection • Microsoft Windows 98, 98 Second Edition (SE), Millennium Edition (Me), NT 4.0, 2000, XP, Mac OS 9.0+, or OS X+ • Internet Explorer 4.0 or higher or Netscape Navigator 4.0 or higher • TCP/IP network protocol installed on each computer 1 Actiontec Dual PC Modem User Manual Modem Features This section contains a quick description of the Modem’s lights (LEDs), and ports and switches on its rear panel. Front Panel The Modem features 4 lights on its front panel: Power, Modem, Network 1, and Network 2. POWER MODEM 1 NETWORK 2 Power Light The Power Light displays the Modem’s current status. If the Power Light glows steadily green, the Modem is receiving power and is fully operational. If the Power Light is not illuminated when the power adapter is plugged in, the Modem has suffered a critical error and technical support should be contacted. Modem Light When the Modem Light glows steadily, the Modem is connected to the ISP. If it is flashing, the Modem is connecting to the ISP. Network Lights 1 and 2 The Network Lights glow green when a network link is established with a computer. A flashing Network light signifies network traffic traveling across the Ethernet connection. 2 Chapter 1 Introduction Rear Panel There are 5 ports (Power, 2, 1, Line, and Phone) and a Reset Switch on the rear panel. POWER LINE PHONE Power Adapter Phone Cord Phone Cord RESET 2 ROUTER TO COMPUTER 1 Ethernet Cable Ethernet Cable (from Power Port (from Port 2 to (from Port 1 to (from Line Port (from Phone Port to Power Outlet) Second Computer) First Computer) to Phone Jack) to Telephone) Reset Switch Depressing the reset switch for one or two seconds will reset the Modem. To restore to factory default settings, depress and hold for at least 10 seconds. Power Port This port is used to connect the smaller end of the Power cord. Port 2 This Ethernet port is used to connect an Ethernet cable between the Modem and an additional computer. Port 1 This Ethernet port is used to connect an Ethernet cable between the Modem and the first computer connected. 3 Actiontec Dual PC Modem User Manual Line Port This port is used to connect a phone cord between the Modem and a phone jack. Phone Port This port is used to connect a phone cord between the Modem and a telephone. Technical Support Actiontec Electronics prides itself on making high-quality, durable, high-performance products. If you need assistance, the Actiontec Technical Support Department is available all day ever day to provide professional support. Actiontec Electronics, Inc. 760 N. Mary Avenue Sunnyvale, CA 94085 Technical Support Phone: 1.888.436.0657 E-mail: click here for instructions Internet: 4 Setting Up the Modem 2 The instructions that follow parallel the steps contained in the Actiontec Installation Buddy™, which provides a visual guide to setting up the Modem. Actiontec recommends the user run the Installation Buddy first, before attempting any other procedures. Connecting the First Computer Connecting the first computer to the Modem for setup involves three basic steps: connecting the Modem to the computer with an Ethernet cable, plugging in the Power cord of the Modem, and connecting the Modem to a phone wall jack. 1. Insert the Installation Buddy CD in the CD-ROM drive of the computer. The Installation Buddy will start automatically. Wait until the following screen appears, read the onscreen instructions, then click Next. 2. Read the onscreen instructions in the next window, then click Next. 5 Actiontec Dual PC Modem User Manual 3. In the next window, click in the box next to “First computer”, then click Next. 4. Select No in the next window, then click Next.This Modem does not operate with AOL. 5. Read the onscreen instructions, then click Next. 6 Chapter 2 Setting Up the Modem 6. Read the onscreen instructions, then click Next. 7. Get the Modem from the Quick Start Kit, then click Next. 8. Get the Yellow Ethernet cable from the Quick Start Kit, then click Next. 7 Actiontec Dual PC Modem User Manual 9. Insert one end of the Yellow cable in the Yellow port (marked “1”) on the back of the Modem, then click Next. 10. Insert the other end of the Yellow cable into an Ethernet port on the back of the computer, then click Next.An Ethernet port looks similar to a phone port, but is slightly larger. 11. Get the black Power cord from the Quick Start Kit, then click Next. 8 Chapter 2 Setting Up the Modem 12. Insert the smaller end of the Power cord in the Black port on the ba...