Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
The Gateway is the simplest way to connect computers to a high-speed broadband connection. This easy-to-use product is perfect for the home office or small business. If you want to take your computing to the next level, the Actiontec 54 Mbps Wireless DSL Gateway is sure to be one of the keys to your success. Package Contents s Actiontec 54 Mbps Wireless DSL Gateway s Black bag (includes Power cord and green DSL cable) s Phone filters s Yellow (Ethernet) cable s Purple (USB) cable s Installation CD s Quick start guide 1 Actiontec 54 Mbps Wireless DSL Gateway User Manual 2 Minimum System Requirements s Active DSL service s Computer with a 10/100 Mbps Ethernet connection, or USB connection s Microsoft Windows 98 Second Edition (SE), Windows Millennium Edition (Me), Windows NT 4.0, Windows 2000, Windows XP, Mac OS 7.1 and above . Note: USB LAN port is not supported with Microsoft Windows 95, Windows NT 4.0, or any Mac OS. s Internet Explorer 4.0 or higher (5.x recommended) or Netscape Navigator 4.0 or higher (4.7 recommended) s TCP/IP network protocol installed on each computer Features s Plug-and-Play installation support for systems with Windows operating systems (98, 98SE, Me, 2000, and XP) s ADSL WAN port (RJ-11) s Compliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) and G.992.2 (G.lite) standard s Auto-handshake for different ADSL flavors s USB 1.1 device specification compliance s 11 Mbps USB data rate (full speed) s Bridged Ethernet over ATM, PPP over ATM, PPP over Ethernet s Precise ATM traffic shaping s IP packet routing and transparent bridge s Routing protocol supports RIP-1, RIP-2, static routing s Built-in NAT, DHCP server s DNS relay support s PAP/CHAP authentication, administrative passwords through Telnet s 64-, 128-, and 256-bit WEP/WPA wireless LAN security s Compliant with IEEE 802.3 Ethernet standard s 10/100 Base-T Ethernet port s Flow control support for Fast Ethernet s Web-based configuration setup s Default configuration backup restore s FTP firmware upgradeable s Web download support s 802.11b/g support Getting to Know the Gateway This section contains a quick description of the Gateway’s lights, ports, etc. The Gateway contains several indicator lights (LEDs) on its front panel and a series of ports on its rear panel. Front Panel The front panel of the Gateway features six lights: Power, DSL, Internet, Ethernet, USB, and Wireless. Power DSL Internet Ethernet USB Wireles Power s DSL Internet Ethernet Wireless USB Power Light The Power light displays the Gateway’s current status. If the Power light glows steadily green, the Gateway is receiving power and fully operational. When the Power light flashes rapidly, the Gateway is initializing. If the Power light is not illuminated when the Power cord is plugged in, the Gateway has suffered a critical error and technical support should be contacted. DSL Light The DSL light illuminates when the Gateway is connected to a DSL line. Internet Light When the Internet light glows steadily, the Gateway is connected to the DSL provider. When it flashes, the Gateway’s built-in DSL modem is training for DSL service. Ethernet Light The Ethernet light illuminates when the Gateway is connected via its Ethernet port. USB Light The USB light illuminates when the Gateway is connected via its USB port. Wireless Light The Wireless light illuminates when the Gateway is connected wirelessly. Rear Panel The rear panel of the Gateway contains five ports (Line, Phone, USB, Ethernet, and Power), as well as a Reset switch. Power Reset Phone Line USB Ethernet Line Port The Line port is used to connect the Gateway to a DSL (Digital Subscriber Line) connection. Phone Port The Phone port is used to connect the Gateway to a telephone. USB Port The USB port is used to connect a computer to the Gateway via USB cable. Ethernet Port The Ethernet port is used to connect a computer to the Gateway via Ethernet cable. The Ethernet port is a 10/100 Mbps auto-sensing port, and either a straight-through or crossover Ethernet cable can be used when connecting to the port. Reset Switch Depressing the Reset switch for one or two seconds will power cycle the Gateway (similar to unplugging and then plugging in the Gateway’s Power cord). To restore the Gateway’s factory default settings, depress and hold the Reset switch for approximately 10 seconds. The reset process will start about 10 seconds after releasing the switch. Power Port The Power port is used to connect the Power cord to the Gateway. N Warning: Do not unplug the Power cord from the Gateway’s Power port during the reset process. Doing so may result in permanent damage to the Gateway. 2 Setting Up the Gateway The instructions that follow parallel the steps contained in the Actiontec Installation Buddy®, which provides a visual guide to setting up the Gateway. It is recommended the user run the Installation Buddy first, before attempting any other procedures. To set up the Gateway, it must be connected to a computer,...