Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This easy-to-use product is perfect for the home office or small business. If you want to take your computing to the next level, the Actiontec USB/Ethernet Home DSL Modem is one of the keys to your success. Package Contents • Actiontec USB/Ethernet Home DSL Modem • Power cord • Yellow cable (Ethernet) • Purple cable (USB) • Installation CD (Disk 1 [includes user manual]) • START HERE guide • BLACK Quick Start guide Minimum System Requirements • Active DSL service • Computer(s) with the following: • a 10 Mbps or 10/100 Mbps Ethernet connection, or USB connection • Microsoft Windows 98, 98 Second Edition (SE), Millennium Edition (Me), 2000, XP,or Apple Macintosh operating system . . Note: USB LAN port is not supported with Microsoft Windows 95, NT 4.0, and Macintosh operating systems. • Internet Explorer 4.0+ (5.0+ recommended) or Netscape Navigator 4.0+ (4.7+ recommended) • TCP/IP network protocol installed 1 Actiontec USB/Ethernet DSL Modem User Manual Modem Features The Modem has a series of LEDs (lights) and a variety of ports. It is recommended that the user become familiar with these features before installing or setting up the Modem. Front Panel There are 4 LEDs (light emitting diodes, or lights) on the front panel of the Modem. Power LED The Power LED glows green when power is supplied to the Modem. When it flashes, the Modem is going through its initialization process. Ready LED The Modem LED glows green when the Modem is connected to the Internet. When it flashes, the Modem is synchronizing the connection. Link LED The Link LED glows solid green when the Modem is connected to a computer via Ethernet or USB cable. Activity LED The Activity LED flashes when information is moving between the computer to which the Modem is connected and the Internet. 2 Chapter 1 Introduction Rear Panel The Modem has five ports on its rear panel. Black Port (Power) The Black port is used to connect the Modem’s Power cord. Yellow (Ethernet) Port The Yellow port is used to connect the Modem to a computer on the home network with the Yellow (Ethernet) cable. Purple (USB) Port The Purple port is used to connect the Modem to a computer on the home network with the Purple (USB) cable. Phone Port The Phone port is used to connect the Modem to a telephone. Line Port The Line port is used to connect the Modem to the DSL connection. 3 Actiontec USB/Ethernet DSL Modem User Manual Technical Support Actiontec Electronics, Inc., prides itself on making durable, high-quality, high- performance products. If you need assistance, the Actiontec Technical Support Department is always available, 24 hours a day, seven days a week, to provide professional support. Actiontec Electronics, Inc. 760 N. Mary Avenue Sunnyvale, CA 94085 Technical Support Phone: 1.888.436.0657 Email: techsupp@actiontec.com Internet: 4 Setting Up 2 The Modem The instructions that follow parallel the steps contained in the Actiontec Installation Buddy™,which provides a visual guide to setting up the Modem. It is recommended the user run the Installation Buddy first, before attempting any other procedures. To set up the Modem, connect it to a computer. After connecting this first computer, other computers can be added to the network via USB,Ethernet, or wirelessly (see “Connecting Additional Computers on page 21). Note:The Installation Buddy is not supported on computers . running Windows 95 and NT 4.0, Macintosh, or Linix operating systems. Connecting a Computer to the Modem Connecting a computer to the Modem for setup involves three basic steps: initial setup, plugging in the Modem’s Power Cord, and connecting the Modem to the computer. Note:The following procedures are for U.S. installations only. . Connecting Via Ethernet 1. Insert Disk 1 (Installation Buddy CD) in the CD-ROM drive of the computer. The Installaton Buddy will start automatically. Wait until the following screen appears, read the onscreen instructions, then click Next. 5 Actiontec USB/Ethernet DSL Modem User Manual 2. The next window appears. Read the instructions, select one of the options by clicking in the appropriate box, then click Next.If the ISP did not provide this information, contact the ISP and request the information. 3. The next window appears. Read the instructions, select First Computer by clicking on the check box, then click Next. 4. In the next window, select Ethernet, then click Next. 6 Chapter 2 Setting Up the Modem 5. The next window appears, with information regarding Actiontec’s 24-hour, 7day- a-week Technical Support. If you have any problems, call 1.888.436.0657. Click Next. 6. The next window appears, showing the items needed to set up the Modem. Click Next. 7. The next window appears. Get the Modem, take it out of its protective plastic bag, then click Next. 7 Actiontec USB/Ethernet DSL Modem User Manual 8. When the next window appears, get the Black Bag, take out the Power Cord and Black DSL Cable, then click Next. 9. In the next window, read the in...