Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
However, with the growing popularity of Bristol® ControlWave®, from Emerson Process Management, the latest generation hybrid PLC/RTU products, customers have expressed interest in an inexpensive migration path to allow them to realize all of the benefits of the new ControlWave technology without replacing their entire SCADA system. The new CPU products, named CW_10, CW_30, CW_35 and CW_31 (generically CW_XX), are intended to offer a cost-effective upgrade path to the ControlWave architecture for existing 33XX systems by allowing you to maintain your investment in I/O, wiring, cabinets and enclosures, communication infrastructure and application program development. The CW_XX CPUs are direct replacements for the 33XX CPUs. You can easily remove the existing CPU and communication cards and replace them with the new ControlWave architecture cards. The CW_XX CPUs support all of the commonly used analog, discrete and counter I/O cards, as well as modems and radios currently installed in the RTUs. Communication compatibility is maintained through the same use of BSAP and Modbus protocols as were used in the 33XX. Benefits The ControlWave architecture offers several advantages over existing 3310/3330/3335s including increased compatibility with industry standards such as IEC 61131-3 programming, Ethernet, IP and FTP communication, support for 56 bit encrypted User Name/Password security sign-on and multiple user access levels. It also offers much greater execution speed, lower power consumption and a larger and more flexible memory model. • Faster performance allows more demanding applications • More memory allows larger applications and data storage • Lower power consumption minimizes solar and battery requirements • ControlWave Designer offers increased programming flexibility • Historical data is maintained on application download for higher data integrity • CW_XX dual Ethernet option allows network segmentation without expensive external routers • Enhanced security protection • Buffered communication ports enhance throughput and allow multiple slave ports Features • 150 MHz, ARM CPU • Real-time clock • Conforms to DPC3330, 3335 and RTU3310 chassis design • Supports most existing 33XX I/O cards • ControlWave Designer IEC 61131-3 programming • ControlWave Designer ACOLL III function block library • 16MB of Flash storage memory Remote Automation Solutions Product Data Document 420ds9b July 10, 2007 - Page 2 ControlWave Upgrade Kits • Permit access to onboard FLASH RAM (33XX has FLASH for boot project only) • Optional one or two 10/100 Mbit Ethernet ports • CW_10 MFIB with four serial ports • CW_30 with two BIP serial ports • CW_35 with two serial ports • CW_31 with one Ethernet port • New Communication card or 3310 MFIB for high speed ports & IP/PPP serial communication • CPU speed increase of up to 1000% • New Protocols – DNP3.0 & CIP Software Migration In order to preserve most of your ACCOL program development time and expense, the ACCOL Translator utility will allow application program conversion to ControlWave Designer IEC 1131 Structured Text. For most applications, the ACCOL Translator will reduce the conversion effort by up to 80% vs. rewriting the program. To properly take advantage of the ACCOL Translator, one must know ACCOL, ControlWave Designer, understand the ACCOL application and have access to the ACC...
Эта инструкция также подходит к моделям:Сетевое оборудование - Bristol ControlWave CW_31 (212.18 kb)
Сетевое оборудование - Bristol ControlWave CW_35 (212.18 kb)