Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
The PC Card could be connected to either 100Mbps Fast Ethernet or 10Mbps Ethernet over unshielded twisted pair (UTP) calbe. The PC Card has the ability of automatic sensing and operating on either speed without manual reconfiguration. Inserting the CardBus Dual-Speed PC Card 1. Hold the CardBus PC Card with wide connector toward the slot and the brand lable facing upward. 2. Insert the CardBus PC Card and push it firmly into the bottom. (Please see the figuer on the next page for reference) Removing the CardBus Dual-Speed PC Card It’s quite different for various computer mechanical designs. Please refer to the PC Card removal instruction in the document for your notebook computer. Connecting and Removing the Cable of Media Coupler to the CardBus PC Card Grasp the PC Card 15-pins connector at the end of the media coupler with the pointing triangle facing upward. Gently insert it into the mating connector on the PC Card until it clicks in place at both sides. Attention should be paid when removing the 15- pins connector. Please press the both sides of the connectors before dragging it out of the PC Card. Connecting to the Network Connect unshielded twisted pair (UTP) cable to the RJ-45 connector of media coupler before loading any network driver. Note: This is not for telephone line connection. • For operation in the100Mbps (100Base-TX) Ethernet network, a Category 5 unshielded twisted pair(UTP) cable should be used to connect between media coupler and 100Mbps hub or switch. • For operation in the 10Mbps (10Base-T) Ethernet network, Category 3, 4 or 5 unshielded twisted pair (UTP) cable could be used to connect between the media coupler and a 10Mbps hub or switch. LED Indicators Activity: Blinks green when transmitting/ receiving data. 10/100Mbps: off /on Link: Glows green when linked to a local network net. SOFTWARE INSTALLATION Windows 95 Installation 1. Assumed the drivers of PC Card slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from the above mentioned, any questions on this layer need to be taken up with the computer's manufacturer. 2. Insert the PC Card into the slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer. 3. Please input the path, A:\ and insert driver diskette. The driver will be installed and you may be asked for the original Windows 95 CD/disks. 4. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 5. Reboot the machine and the card will be fully functional. Windows 98 Installation 1. Assumed that the drivers of PC Card slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer. 2. Insert the PC Card into the slot. In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer. 3. Windows will prompt a ADD NEW HARDWARE WIZARD dialog box, then press Next. 4. Then Windows will prompt a ADD NEW HARDWARE WIZARD dialog box. In this time, select Search for the … and press Next. 5. Windows will prompt a ADD NEW HARDWARE WIZARD dialog box. In this time, select Floppy disk drives and please insert driver diskette. Then press Next, the driver will be installed and you may be asked for the original Windows 98 CD/disks. 6. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 7. Reboot the machine and the card will be fully functional. Windows 2000 Installation 1. Assumed that the drivers of PC Card slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart from above mentioned, any questions on this layer need to be taken up with the computer's manufacturer. 2. Insert the PC Card into the slot, and wait for the install wizard. 3. Windows will prompt a Found New Hardware Wizard dialog box, then press Next. 4. Then Windows will prompt a Install Hardware Device Drivers dialog box. In this time, select Search for a suitable driver for my device (recommanded) and press Next. 5. Windows will prompt a Locate Driver Files dialog box. In this time, select Floppy disk drives and please insert driver diskette. Then press Next, the driver will be installed and you may be asked for the original Windows 2000 CD/disk. 6. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed. 7. Reboot the machine and the card will be fully functional. Windows ME Installation 1. Once the PC Card is well connected to your computer, Windows ME will automatically detect the new device. Select Specify the Location of the driver… and click Next. 2. Insert the device driver disk into the floppy disk drive on your system. Select Removable Media (Floppy, CD-ROM…) and click Next. 3. Click Next to continue. 4. Win...