Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Multi-Homing Dual WAN Firewall Router security feature Some functions that are available in the Multi-Homing are: Packet Filter, Proxy Server, Hacker invasion alarm, Packet monitor log, Policy, etc. Multi-Homing Dual WAN Firewall Router installation This product is a hardware Multi-Homing. Therefore the installation is much easier than a software Multi-Homing. First the user has to prepare three network cables, and connect them to the LAN, WAN 1 and WAN 2 connectors respectively. The LAN interface has to connect to the office’s LAN network on the same HUB/Switch. The WAN 1 interface has to connect with a WAN 1 router, DSL modem, or Cable modem. The WAN 2 interface has to connect with a WAN 2 router, DSL modem, or Cable modem. Multi-Homing Dual WAN Firewall Router function setting The Multi-Homing Dual WAN Firewall Router has a built in WEBUI (Web User Interface). All configurations and management are done through the WEBUI using an Internet web browser. Multi-Homing Dual WAN Firewall Router monitoring function The Multi-Homing provides monitoring functions which contains traffic log, event log, traffic alarm, event alarm, and traffic statistics. Traffic alarm records the packets of hacker invasions. Not only does the Multi-Homing log these attacks, it can be set up to send E-mail alerts to the Administrator automatically for immediate hacker’s invasion crisis management. Multi-Homing Dual WAN Firewall Router supporting protocols The Multi-Homing Dual WAN Firewall Router supports all the TCP, UDP and ICMP protocols, such as HTTP, TELNET, SMTP, POP3, FTP, DNS, PING, etc. System Administrators can set up proprietary protocols according to operating requirements. Hardware Description External Port (WAN 1): Use this port to connect to the WAN 1 router, DSL modem, or Cable modem. External Port (WAN 2): Use this port to connect to the WAN 2 router, DSL modem, or Cable modem. LAN Port (LAN): Use this port to connect to the LAN network of the office. Reset: Reset the Multi-Homing Dual WAN Firewall Router to the original default settings. DC Power: connect one end of the power supply to this port, the other end to the electrical wall outlet. ....: Reset ....: WAN 1 External 1 Port ....: WAN 2 External 2 Port ....: DC Power outlet ....: LAN Internal Port Connecting Example: Multi-Homing: LAN Port = 192.168.1.1 WAN 1 Port = x.x.x.x (provided by ISP) WAN 2 Port = x.x.x.x (provided by ISP) Connection Type: 10/100 Mbps Cable Connection .LAN 1 Port.= 192.168.1.3 .LAN 2 Port.= 192.168.1.4 .LAN 3 Port.= 192.168.1.5 .LAN 4 Port.= 192.168.1.6 .WAN 1 Port.= 61.11.11.11 .WAN 2 Port.= 61.22.22.22 Multi-Homing Dual WAN Firewall Router Software (management tool) description Multi-Homing Dual WAN Firewall Router management tool: WebUI The main menu functions are located on the left-hand side of the screen, and the display window will be on the right-hand side. The main functions include 12 items, which are: Administrator, Configuration, Address, Service, Schedule, Policy, VPN, Virtual Server, Log, Alarm, Statistics, and Status. Quick Setup WebUI Configuration example STEP 1: Connect both the Administrator’s PC and the LAN port of the Multi-Homing Dual WAN Firewall Router to a hub or switch. Make sure there is a link light on the hub/switch for both connections. The Multi-Homing Dual WAN Firewall Router has an embedded web server used for management and configuration. Use a web browser to display the configurations of the Multi-Homing (such as Internet Explorer 4(or above) or Netscape 4.0(or above) with full java script support). The default IP address of the Multi-Homing is 192.168.1.1 with a subnet mask of 255.255.255.0. Therefore, the IP address of the Administrator PC must be in the range between 192.168.1.2 /24– 192.168.1.254/24. If the company’s LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP Address is 172.16.0.1) the Administrator must change his/her PC IP address to be within the same range of the LAN subnet (i.e. 192.168.0.0). Reboot the PC if necessary. By default, the Multi-Homing Dual WAN Firewall Router Multi-Homing is shipped with its DHCP Server function enabled. This means the client computers on the LAN network including the Administrator PC can set their TCP/IP settings to automatically obtain an IP address from the Multi-Homing Dual WAN Firewall Router. The following table is a list of private IP addresses. These addresses may not be used as a WAN 1 IP address. 10.0.0.0 ~ 10.255.255.255 172.16.0.0 ~ 172.31.255.255 192.168.0.0 ~ 192.168.255.255 STEP 2: Once the Administrator PC has an IP address on the same network as the Multi-Homing Dual WAN Firewall Router, open up an Internet web browser and type in in the address bar. A pop-up screen will appear and prompt for a username and password. A username and password is required in order connect to the Multi-Homing. Enter the default login username and password of Administrator (see below). Username: admin Password: admin Click OK STEP 3: Af...