Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. This device is designed to work with the notified networks in all EC member states. Nevertheless, some of the network services in invidual countries might not be supported, but they will not affect the normal data and fax applications. For example, the metering charge service in Germany. Besides you may encounter difficulty of using PULSE dialing function in some of the countries, such as Nordic countries. This kind of network compatibility is dependent on the physical and software settings of this device. If the users are desired to use this device on those networks, they should contact the vendor or supplier first. Table of Contents Introduction.............................................................1 SPECIFICATIONS.....................................................1 Modem...............................................................1 Fax.....................................................................1 SYSTEM REQUIREMENTS........................................2 Hardware Installation.............................................3 Software Installation...............................................4 INSTALLATION FOR WINDOWS 98...........................4 Setup Diagnostics..............................................6 INSTALLATION FOR WINDOWS 2000.......................7 Setup Diagnostics..............................................9 INSTALLATION FOR WINDOWS MILLENNIUM........10 Setup Diagnostics............................................13 Internet Access.......................................................14 Introduction The USB V.90 Tiny Modem complies with the Universal Serial Bus functionality built in Windows 98/2000/Millennium. It is compatible with Bell, ITU-T (formerly CCITT) and Hayes AT commands. The USB V.90 Tiny Modem enables you enjoy all the benefit offered by USB technology and get a faster and easier Internet access. With the especially compact design of the Tiny Modem, you can not only save the cost but also eliminate the need of using an extra USB cable as you usually do. Moreover, using standard phone lines, the data communication functions of the modem will enable you to successfully hook up to the Internet, transmit E-mail, send and receive information and communicate with other PCs, Bulletin Board Services (BBS) or computer networks such as CompuServe. Specifications Modem V.90, K56flex 56Kbps, V.34+ 33.6Kbps, V.34 28.8Kbps, V.32bis 14.4Kbps V.42bis/V.42, MNP 2-5 data compression and error correction AT command set Fax G3, V.17 14400bps, V.29 9600bps, Fax Service Class 1 compliant System Requirements .. A Pentium. processor-based personal computer 166MMX or above .. At least 16 MB of RAM .. An USB port .. Microsoft Windows 98/2000/Millennium .. A CD-ROM drive Hardware Installation 1. Locate the USB host port of your system. Connects the USB Type A connector to the USB host port on your computer. 2. Connects the phone line to the phone line jack Software Installation Installation for Windows 98 1. When the USB V.90 Tiny Modem is well connected to your computer, Windows 98 will automatically detect the new device. Click Next. 2. Select Search for a suitable driver for my device (recommended) and click Next. 3. Insert the device driver compact disc into the CD-ROM drive and select Specify a location. Click Browse button and select the drive where you load the device driver. Click Next. Windows will start searching for the appropriate driver for the software installation. 4. Click Next. 5. Click Finish. The software installation is successfully completed. 6. When the following dialog box appears, select the country/location where you are, and click Enable PBX. Click OK. 7. When finished, restart your computer to activate the new device. Setup Diagnostics You can perform the following steps to check if your USB V.90 Tiny Modem is well installed. 1. Go to Start>Settings>Control Panel>Modems. 2. When the Modems Properties dialog box appears, select the Diagnostics tab. 3. Select USB V.90 TINY MODEM and click OK. 4. If USB V.90 TINY MODEM is not found, stop the diagnostics procedures and skip to the following section titled Uninstallation. 5. The USB modem is well installed if the information is found on the following screen. Click OK to exit. Installation for Windows 2000 1. Once the USB V.90 Tiny Modem is well connected to your computer, Windows 2000 will automatically detect the new device. Click Next. 2. Select Search for a suitable driver for my device (recommended) and click Next. 3. Insert the device driver compact disc into the CD-ROM drive. Select Specify a location and click Next. 4. Click Browse button and select the drive where you load the device driver (f...