Оценок - 3, средний балл: 4.3 ( )

Производитель: 2Wire Размер: 3.28 mb Название файла: ug_100s_100sw.pdf Язык инструкции:

The HomePortal provides all of the same features as the products listed below so you don’t need to worry about losing Internet sharing and security capabilities. For more information on the HomePortal firewall, see Technical Support at If you have any of the following (or similar) applications installed on your computers, remove or disable them according to the manufacturer’s instructions before proceeding. Internet sharing applications such as... Proxy software such as... Security software such as... • 3Com HomeClick • Microsoft Internet Connection Sharing • Intel Anypoint ISS • WinGate • Sygate • Norton Internet Security • Black Ice • Zone Alarm Third: Check your computer’s browser and system requirements Verify that your computers meet the following minimum requirements: Browser Requirements Windows: Microsoft Internet Explorer 5.0 or higher (included on the HomePortal Setup Wizard CD) or Netscape Navigator 4.7 or higher. Macintosh: Microsoft Internet Explorer 5.0 or Netscape 4.74 or higher (included on the HomePortal Setup Wizard CD). 3 System Requirements • At least 32 MB of RAM • At least one computer with CD-ROM • 5 MB of available hard disk space for 2Wire HomePortal software • Windows 98, 98SE, Windows ME, Windows NT 4.0 with Service Pack 6, Windows 2000, Windows XP, or Mac OS 8.6 or higher • Network interface card(s) appropriate to your HomePortal model. 4 Step 2 Connect Your First Computerto the HomePortal Choose a computer and connection type The first computer you connect to your home network is used to configure the HomePortal residential gateway for proper operation. Choose one of the following methods to connect your first computer to the HomePortal. Save and close all open programs before you begin connecting your HomePortal. Connection Type Go to... Ethernet page 6 Requires: A computer with an Ethernet port. Recommended for: Primary computer in the same room as the HomePortal. USB page 7 Requires: A Windows 98, 98 SE, ME, Windows 2000, or Windows XP computer with an available USB port. Recommended for: Primary computer in the same room as the HomePortal. Home phoneline networking (HomePNA) page 10 Requires: A computer with a HomePNA port or an external HomePNA adapter such as the 2Wire PC Port. Recommended for: Additional computers in the same room as the HomePortal or computers in other rooms. Network connection via Ethernet hub or switch page 12 Requires: An Ethernet hub or switch and a computer with an Ethernet port. Recommended for: Multiple computers in the same room as the HomePortal. Wireless (Model 100SW only) page 13 Requires: A computer with an 802.11b wireless network adapter* installed. Wireless adapters are purchased separately from the HomePortal. Recommended for: Mobile computers such as laptops. * If you use a 2Wire wireless adapter (PC card or USB adapter) in your computer for wireless networking, the HomePortal Setup Wizard software automatically configures it to communicate with the HomePortal during setup, but you will need to install the driver. See Appendix A for detailed installation instructions. If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for detailed configuration instructions. 5 Ethernet Connection Requires a computer with an Ethernet port 1. Connect the Ethernet cable from your broadband modem to the BROADBAND MODEM port on the HomePortal. 2. Connect the provided Ethernet cable from your computer to the LOCAL ETHERNET port on the HomePortal. 3. Connect the provided AC power adapter from the HomePortal’s POWER port to an electrical outlet.The green POWER light on the front of the HomePortal should come on. 4. Connect the remaining cable from the broadband modem to your broadband service (cable or DSL wall jack). 5. This connection is only required if you plan to use HomePNA to connect other computers to your network. Connect the provided telephone cable from the PHONE LINE port on the HomePortal to a telephone jack. IMPORTANT: Don’t forget to reboot your cable or DSL modem after new connections are made and make sure that your modem is powered on before proceeding. Check your connections With your computer completely started, verify the POWER and HOME NETWORK indicator lights on the front of the HomePortal are green. If they are not, see “Diagnosing connection problems” on page 22. The BROADBAND LINK indicator light will not turn green until the HomePortal software has been installed and an Internet connection has been established. Continue from here to Step 3 “Install the HomePortal Software” on page 15. 6 USB Connection Requires a Windows 98, 98 SE, Windows ME, Windows 2000, or Windows XP computer with an available USB port Note: In a HomePortal network, only one Windows 98, 98 SE, Windows ME, Windows 2000, or Windows XP computer can be directly connected to the HomePortal via USB. Additional computers m...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: