Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации TP-Link, модель Archer C20i

Производитель: TP-Link
Размер: 7.51 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


5 Choose the frequency you want for your wireless network and then click Next. For example we choose 2.4GHz and 5GHz below. 7 6 You can rename your 5GHz wireless network and create your own password in this page. Then click Next to continue. You can rename your 2.4GHz wireless network and create your own password in this page. Then click Next to continue. Appendix 2: Additional Features Troubleshooting If your router does not work properly, you can reset it and then configure it again. With the router powered on, press and hold the WPS/Reset button on the side panel for approximately 8 seconds before releasing it. 4. How do I restore my router’s conguration to its factory default settings? 3. What can I do if I forget my password? 1) For default wireless password: Please refer to the “Wireless Password/PIN” labeled on the bottom of the router. 2) For the web-based management page password: Reset the router rst and then use the default user name and password: admin, admin. 1) Verify all the hardware connections. The computer should be connected to the Ethernet port(yellow). 2) Turn off the router and turn it back on. 3) Change to another cable/web browser/computer. 4) Check the IP settings of your computer, and ensure that it is set to "Obtain an IP address automatically". 1. What can I do if I cannot access the Internet? 2. What can I do if I cannot open the Web-based management page? You can set up additional features by referring to the Technical Support page on the TP-LINK website or the User Guide on the resource CD. Open ports for Game Console FAQ ID: 72 Set up Bandwidth Control FAQ ID: 194 Set up Parental Control FAQ ID: 350 Set up Access Control FAQ ID: 359 Set up WDS Bridging FAQ ID: 440 Set up/Change the wireless security settings FAQ ID: 256 Upgrade the firmware FAQ ID: 296 Restore the factory default settings FAQ ID: 426 1) Make sure that your computer can access the Internet when connected directly to the modem using an Ethernet cable. 2) Check that if all cables are connected correctly. Try different Ethernet cables to ensure that they are working properly. 3) Check that if you are able to access the router’s web-based management page. If not, please refer to “What can I do if I cannot open the Web-based management page?”. 4) Please log in the web-based management page (click the menu “Network > WAN”, and ensure that the WAN Connection Type is Dynamic IP; this is the suitable connection type for most DSL/Cable modem and other network. 5) For cable modem users, please try rebooting the modem rst. If the problem still exists, please go to “Network > MAC Clone”, and click Clone MAC Address and then Save. After this two steps, if you are still unable to access the Internet, please contact our technical support for further assistan...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории