Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Follow the easy steps in this guide to properly set up your adapter. Please verify that all the package contents below are available. Package Contents DWA-548 Wireless N 300 PCI Express Desktop Adapter Two Antennas Low Profile Bracket CD with drivers and software If any of the above items are missing, please contact your reseller. System Requirements • A desktop computer with an available PCIe slot • Windows® 7, Windows Vista® (32-bit), XP (32/64-bit with Service Pack 2 or higher) • 300MHz processor and at least 64MB of RAM DWA-548 What This Product Does The D-Link DWA-548 is an 802.11n client device that delivers unrivaled wireless performance for your desktop computer. Once connected, access your network’s high-speed Internet connection while sharing photos, files, music, video, printers, and storage. Before You Begin Before installing your new D-Link wireless adapter, please verify the following: • Remove any previous installations of wireless adapters. • Disable any built-in wireless adapters. • Verify the settings such as the wireless network name (SSID) and security settings of the network(s) you want to connect to. Note: If you’ve installed a different manufacturer’s adapter or a different model D-Link adapter, make sure the software is uninstalled before installing the new software. Some utilities may cause a conflict with the new software. Windows® 7, Windows Vista® and XP users may use the built-in wireless utility. Installation Follow the steps below to install your new D-Link wireless adapter. Do NOT install the adapter into your computer before running the installation CD. Step 1: Insert the DWA-548 Driver CD into the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\autorun.exe” (where D: represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Install and follow the on-screen instructions to install the wireless adapter drivers and software. Step 2: Before installing, write down the serial number and hardware revision (e.g. A1) in case you need to contact technical support. Please turn off your computer and unplug the power cord from the computer. Remove the case to access your motherboard. Firmly insert the DWA-548 adapter into an available PCIe slot inside your computer. Once inserted, close the case and insert the power cable back into the computer. Connect both antennas to the adapter and then turn on your computer. Windows will automatically detect and install the adapter. Step 3: After installation, the D-Link DWA-548 uses the Wireless Connection Manager as the management software. The manager provides the user with an easy interface to change any settings related to the wireless adapter. Clicking on the Wireless Connection Manager icon on the desktop will start the Configuration. Technical Support Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Canada Telephone: (877) 453-5465 Telephone: (800) 361-5265 Internet: Internet: Copyright ©2012 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details. Version 1.0 | March 22, 2012 6DWA548Q..01G FRANCAISFRANCAIS Guide d’installation rapide Adaptateur PCI Express Sans fil N 300 pour ordinateur de bureau Merci d'avoir achete l'adaptateur PCI Express Sans fil N 300 pour ordinateur de bureau. Procedez comme suit pour configurer correctement votre adaptateur. Verifiez que le contenu de la boite est disponible. Contenu de la boite Adaptateur PCI Express pour ordinateur de bureau Sans fil N 300 DWA548 Deux antennes Support de fixation extra-plat CD avec les pilotes et le logiciel Contactez votre revendeur s'il manque l'un des elements ci-dessus. Configuration systeme requise • Ordinateur equipe d'un emplacement PCIe disponible • Windows® 7, Windows Vista® (32 bits), XP (32/64 bits avec Service Pack 2 ou superieur) • Processeur a 300 MHz et au moins 64 Mo de RAM DWA-548 Caracteristiques du produit Le DWA-548 de D-Link est un peripherique client 802.11n offrant des performances sans fil...