Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Please wait about one minute before continuing. 1 Unplug the power to your DSL or Cable modem. 2 Network Requirements: • An Ethernet-based broadband modem Web-based Configuration Requirements: Computer with the following: • Windows® or Mac OS® X operating system • An installed Ethernet adapter or wireless adapter Supported Browsers: • Internet Explorer 7 or higher • Safari 4 or higher • Chrome • Firefox Make sure you have the latest version of Java installed. Visit to download the latest version. mydlink Requirements: • iPhone/iPad/iPod Touch (iOS 3.0 or higher) • Android device (1.6 or higher) • Web Browser Requirements: • Internet Explorer 7 or higher • Safari 5 or higher • Chrome • Firefox Note: To learn more about mydlink, visit 1 12V1AWPSLAN4312INTERNETPOWERRESET Wireless AC750 Dual Band Cloud Router 8 Computer Modem 6 4 3 7 5 Modem DIR-810L DIR-810L Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. 2 Ethernet Cable 12V1AWPSLAN4312INTERNETPOWERRESET 1 Power LED A solid green light indicates a proper connection to the power supply. The light will be solid orange during boot-up and will blink green during the WPS process. 2 Internet LED A solid light indicates a connection to the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet. If this LED is blinking orange, this indicates that the “on demand” connection type is set and the Internet connection is idle. 3 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles. 4 Internet Port Connect your broadband modem to this port using an Ethernet cable. 5 Reset Button Press and hold the reset button with a paper clip for six seconds to reset the router to the factory default settings. 6 Power Button Press to power the router on and off. 7 Power Port Connect the supplied power adapter. 8 WPS Button Press to start the WPS process. The Power LED will start to blink. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED does not light up, press the Power button on the back of the router. 5 DIR-810L Ethernet Port Package Contents 12V1AWPSLAN4312INTERNETPOWERRESET DIR-810L DIR-810L Wireless AC750 Dual Band Cloud Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide Modem Computer Internet Port (yellow) Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. 3 Before you Start Modem 12V1AWPSLAN4312INTERNETPOWERRESET • Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. • Users with Cable providers - Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes. • Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the DIR-810L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. Computer DIR-810L After the router has powered up, verify that the Power (green) and Internet (orange or green) LEDs are both lit then continue with the Configuration section on the other side. 6 Ethernet Cable If any of the above items are missing, please contact your reseller. ENGLISH Troubleshooting B. QRS Mobile Setup Configuration GPL Code Statement How do I connect my wireless devices to the DIR-810L router? 1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Network name you assigned in the wizard and connect. Note: If you did not run the setup wizard or you reset the router to its default settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. You can also connect using WPS: 1. Press the WPS button on the DIR-810L for three seconds. 2. Within one minute press the WPS button on your wireless device. 3. Allow up to two minutes to connect. Note: Some devices may require you to log in to a utility to start the WPS process. Refer to the user manual of the device you want to connect to the router if you do not know how to start the WPS process. How do I change the wireless settings on the DIR-810L router? 1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter (Windows) or (Mac). You can also enter the IP address of the router (2. At the login screen, select admin from the user name drop-down and enter the router password you created in the wizard (no password by default). 3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to create a new Wi-Fi network name (SSID) and Wi-Fi password. Documentation available at http://www...