Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации NETGEAR, модель WNR834Bv2

Производитель: NETGEAR
Размер: 246.55 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


To log in to the router after installation: 1. Open a browser window and type in the address field of your browser. Press Enter. You can enter either of these addresses to connect to your wireless router: or A login window similar to the one shown below will display. Installing Your Router Using the Smart Wizard Figure 6 2. When prompted, enter the default User Name and Password (admin for the router User Name and password for the router Password), both in lowercase letters. If you changed the User Name and Password from the defaults, then enter your new User Name and Password. The router User Name and Password are unique to the router and are not the same as any other User Name or Password you may use to log in to your Internet connection. The Firmware Upgrade Assistant screen will display. 3. Click Yes to check for new firmware (recommended). The router will automatically check the NETGEAR database for a new firmware image file. If no new firmware version is available, the message “No New Firmware Version Available” will display. (If you select “No,” you can check for new firmware later; see “To manually check for new router firmware:” on page 12.) 4. If new firmware is available, you will be directed to the new firmware version on the NETGEAR website. Click Right-click and Save to Download and save the file to a location on your hard disk. Usually the firmware image is an .img (or .chk) file and does not need to be decompressed before you can use it to upgrade your router. If, however, the file is a .zip file, then the image is compressed and must be “unzipped” before you can use the file. On Windows machines, the WinZip utility can be used to unzip the file. Installing Your Router Using the Smart Wizard To upgrade your router: 1. If the Router Upgrade screen does not display automatically, select Router Upgrade under Maintenance on the main menu. The Router Upgrade screen will then display. 2. Click Browse and locate the unzipped firmware image that you downloaded to your PC (the file will end in .img or .chk). 3. Once you have selected the file, click Upload to send the software to the router. The upload process will take several minutes. When the software upload process is complete, the router will restart. Do not try to go online, turn off the router, shut down the computer, or do anything else to the router until the router finishes restarting! When the Ready light stops blinking, wait a few seconds more before using the router. 4. After the router has restarted, select Router Status under the Maintenance menu. Check the Firmware Version to verify that your router now has the new software installed. If you are unable to successfully upgrade using this method, refer to the online Reference Manual for other ways to upgrade the router. The Reference Manual is available through the Documentation link on the router main menu (or through a link on the Resource CD). If you selected the No radio box during installation, and want to check for new firmware later, follow the procedure below. It is advisable to determine the firmware version currently running on your router before you check for updates on the NETGEAR website. Then go to the NETGEAR website and select the model number for this router. If a later version of the firmware is available, download the firmware to your computer and upgrade your router. To manually check for new router firmware: 1. Open a browser window and type in the address field of your browser. Press Enter. 2. When prompted, enter the default Password (password for the router Password), in lowercase letters. If you changed the Password from the default, then enter your new Password. 3. Select Router Status under the Maintenance menu on your router interface. When the Router Status screen displays, note the version number of your router firmware. 4. Go to and select Downloads from the menu bar. 5. From the Product Selection pull-down menu, select your router model number. The Product Support page for your router will display. Installing Your Router Using the Smart Wizard 6. Under Downloads, check the most recent Firmware Version offered against the Firmware Version shown on your Router Status screen. 7. If the version on the NETGEAR website is more recent, click on the version number. Then, click Right-click and Save to Download and save the file to a location on your hard disk. 8. Follow the procedure in “To upgrade your router:” to complete the upgrade process. Installing Your Router Using the Smart Wizard Installing Your Router Using the Smart Wizard Installing Your Router Manually (Advanced, Mac, and Linux Users) Before installing and connecting your router manually, review the list below and make sure that you have all of the necessary information. • Internet service connection through an Internet Service Provider (ISP). • The configuration...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории