Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики NETGEAR JNR1010 |
Фрагмент инструкции
Ethernet cable to your modem, to turn off your modem. and the other end to the Internet port Wait approximately 2 minutes until your modem turns on. on your router. If your modem has a battery backup, first remove and reinsert the battery Modem or Cable Internet DSL before connecting your modem to power. Step 6: (not included) N150 Wireless Router Step 5: Step 4: Connect the power adapter to the Connect the router Open a browser. router, then plug it into an outlet. to your computer. If the Web page does not display, Wait until the wireless LED turns Use another Ethernet cable to establish close and re-open the browser solid green. a wired connection as shown in this diagram. and enter If none of the LEDs turn on, make sure that Optionally, connect wirelessly by using the in the address bar, or check the the Power On/Off button is in the ON position preset wireless security settings “Troubleshooting” section in (pushed in). located on the bottom label. the User Guide. Preset Wireless Security This product has a unique Wi-Fi network name (SSID) and network key (password). The default SSID and network key (password) are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset Wi-Fi network name (SSID) and network key (password). If you do change the settings, the information on the bottom of the product does not apply. Find the preset Wireless Settings on your router and record them here: Wi-Fi Network Name (SSID) _______________________________ Network Key (Password) _________________________________ If you change the preset wireless settings, record it here: Wireless Network Name (SSID) _______________________________ Network Key (Password) _____________________________________ If necessary to retrieve or update your password, type in a Web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. May 2012 Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset Wi-Fi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it), and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens: 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work. Technical Support Thank you for selecting NETGEAR products. After installing your device, register at so you can use our telephone support service. Also go to for product updates, additional documentation, and support. For the free Live Parental Controls centralized Internet site filtering software for yourrouter, download from: For additional features, including Traffic Metering and Guest Access, log in to your router at: For complete DoC, go to the NETGEAR EU Declarations of Conformity website at For GNU General Public License (GPL) related information, go toWARNING: Do not stack equipment, or place equipment in tight spaces, in drawers, or on carpets. Make sure your equipment is surrounded by at least 2 inches of air space. Internet STATUS GOOD Network Map Number of devices 16 Parental Controls WiFi Connection STATUS Connected Router Settings Click here ReadySHARE Click hereClick here Download the free DesktopNETGEAR Genie Automatically fix common network problems and easily manage your home network connections. NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or r...