Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Select the encapsulation method and enter the login name. If you want to change the login time-out, enter a new value in minutes. •No. Enter the account and domain names, only if needed. 3.Enter the settings for the IP address and DNS server. The default settings usually work fine. If you have problems with your connection, check the ISP settings. 4.Click Apply. Your settings are saved. 5.Click Test to test your Internet connection. If the NETGEAR website does not display within 1 minute, see Chapter 10, Troubleshooting. Internet Setup Screen Fields The following descriptions explain all of the possible fields in the Internet Setup screen. The fields that display in this screen depend on whether tan ISP login is required. Does Your Internet connection require a login? Answer either yes or no. These fields display when no login is required: •Account Name (If required). Enter the account name provided by your ISP. This might also be called the host name. •Domain Name (If required). Enter the domain name provided by your ISP. These fields display when your ISP requires a login: •Internet Service Provider. PPPoE or PPPoA. •Login. The login name provided by your ISP. This login name is often an email address. •Password. The password that you use to log in to your ISP. •Service Name (if Required). If your ISP provided a service name, enter it here. •Connection Mode. Always On, Dial on Demand, or Manually Connect. •Idle Timeout (In minutes). If you want to change the login time-out, enter a new value in minutes. This setting determines how long the router keeps the Internet connection active when there is no Internet activity from the LAN. A value of 0 (zero) means never log out. Internet IP Address. •Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. •Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP router to which your router will connect. Domain Name Server (DNS) Address. The DNS server is used to look up site addresses based on their names. •Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. •Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also. NAT (Network Address Translation). NAT allows computers on your home network to share the router Internet connection. NAT is enabled by default because it is needed in most situations. The following settings are available: •Enable •Disable •Disable Port Scan and DoS Protection Router MAC Address. The Ethernet MAC address that the router uses on the Internet port. Some ISPs register the MAC address of the network interface card in your computer when your account is first opened. They accept traffic only from the MAC address of that computer. This feature allows your router to use your computer’s MAC address (also called cloning). •Use Default Address. Use the default MAC address. •Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using. You have to use the one computer that the ISP allows. •Use This MAC Address. Enter the MAC address that you want to use. Parental Controls The first time you select Parental Controls from the Basic Home screen, your browser goes to the Live Parental Controls website. You can learn more about Live Parental Controls or download the application. 1.Select Parental Controls on the dashboard screen. 2.Click either the Windows Users or Mac Users button. 3.Follow the onscreen instructions to download and install the NETGEAR Live Parental Controls Management utility. After installation, Live Parental Controls automatically starts. 4.Click Next, read the note, and click Next again to proceed. Because Live Parental Controls uses free OpenDNS accounts, you are prompted to log in or create a free account. 5.Select the radio button that applies to you and click Next. •If you already have an OpenDNS account, leave the Yes radio button selected. •If you do not have an OpenDNS account, select the No radio button. If you are creating an account, the following screen displays: •Fill in the fields and click Next. After you log on or create your account, the filtering level screen displays: 6.Select the radio button for the filtering level that you want and click Next. 7.Click the Take me to the status screen button. Parental controls are now set up for the router. The dashboard shows Parental Controls as Enabled. Basic Wireless Settings The Wireless Settings screen lets you view or configure the wireless network setup. The router comes with preset security. This means that the WiFi network name (SSID), network key (password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID and p...