Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If you have not yet installed network cards in your PCs, you can use the Model FA310 network card, a NETGEAR™ product. Additionally, if you want to set up a network, you can use the Model DB104 10/100 Mbps Fast Ethernet Network Starter Kit or the Model SB104 10 Mbps Starter Kit, also NETGEAR products. Features The Model PS104, Model PS105, or Model PS110 print server has these features: • Support for NetBEUI, TCP/IP, and IPX/SPX protocols and Windows 95, Windows 98, Windows NT, Novell NetWare, and UNIX operating systems • Autosensing 10/100 megabit per second (Mbps) port for 10BASE-T and 100BASE-T Ethernet connections (Model PS110 only) • Built-in 4-port and 5-port hub functionality (Model PS104: four 10BASE-T ports; Model PS105: four 10BASE-T ports and one BNC port) • FirstGear™ software program developed by NETGEAR, which enables easy configuration of the print server for Windows 95, Windows 98, and Windows NT users operating on a Microsoft network • Compact size that allows the print server to be used where space is limited and to be mounted with Velcro on the side of a printer • Flash EPROM upgradability • Extensive LED indicators for at-a-glance status Model PS104/PS105/PS110 Print Server Installation Guide Model PS104/PS105/PS110 Print Server Installation Guide Verify that your package contains the following: • Model PS104, Model PS105, or Model PS110 print server • Power adapter • BNC terminator and T-Connector (Model PS105 only) • PS100 Series Print Server Resource CD • This installation guide • Warranty & Owner Registration Card • Support Information Card Customer Support Call your reseller or NETGEAR Customer Support in your area if there are any wrong, missing, or damaged parts. Keep the carton, including the original packing materials. Use them to repack the print server if you need to return it for repair. Note: If the supplied power adapter does not meet your country requirements, make sure you use the appropriate power adapter as required by your national electrical codes and ordinances. Package Contents PWR Link/Act Alert PRINTER 10/100 Mbps Print Server 1 2 On=Link; Blinking=Rx 3 4 Col NETWORK MODELPS104 9002FB PS100 Series Print Server (Model PS105 Print Server shown) PS100 Series Print Server Resource CD, Installation Guide, Warranty & Owner Registration Card, Support Information Card Power Adapter Product Illustration Product Illustration Link/Act 10/100 Mbps Print Server On=Link; Blinking=Rx PS104MODEL Link/Act 10 Mbps Print Server PS105MODEL PRINTER LEDs NETWORK LEDs PRINTER LEDs PWR LED Front Panel of the Model PS104 Print Server Front Panel of the Model PS110 Print Server Front Panel of the Model PS105 Print Server Link/Act Link/Act 10/100 Mbps Print Server PS110MODEL PRINTER 1 LEDs NETWORK LEDs NETWORK LEDs PRINTER 2 LEDs PWR LED PWR LED 9003FA Model PS104/PS105/PS110 Print Server Installation Guide LEDs The following table describes the activity of the LEDs on the PS100 Series print servers. Label Color Activity Description PWR (power) Green On Power is supplied to the print server. PRINTER, PRINTER 1, or PRINTER 2 Link/Act Green On Off Blinking A printer is connected to the port. No printer is connected to the port. Data transmission is occurring on the port. Alert Amber On Off The connected printer is offline, is out of paper, or has a paper jam. The connection between the printer and print server is good. NETWORK (On Model PS104 and Model PS105) Link/Rx Green Off On Blinking No link exists between the port and the network. The 10 Mbps half-duplex link between the print server and the network is good. Incoming data is on the port. Col Amber Blinking Data collision is occurring on the network. Note (collision) that occasional collisions are normal. NETWORK (On Model PS110) Link Green On The link between the port and the network is good. 100M Green On Off The link between the port and the network is a 100 Mbps half-duplex connection. The link between the port and the network is a 10 Mbps half-duplex connection. Tx Green Blinking The print server is sending data out of the port. Rx Green Blinking The print server is receiving data on the port. Col Amber Blinking Data collision is occurring on the network. Note (collision) that occasional collisions are normal. Model PS104/PS105/PS110 Print Server Installation Guide Rear Panel The rear panel of the Model PS104 Print Server and Model PS105 Print Server has one parallel PRINTER port, and the rear panel of the Model PS110 Print Server has two parallel ports for printers (PRINTER 1 and PRINTER 2). These printer ports accept either printers or other parallel devices such as a plotter. Number of Ports PS104 PS105 PS110 10BASE-T BNC Autosensing 10/100BASE-T 4 n/a n/a 4 1 n/a n/a n/a 1 Parallel Printer Port 1 1 2 All models have a power adapter receptacle that accepts a 12 V DC power adapter. 3 2 NETWORK PRINTER 12VDC 1.2A Normal/Uplink PRINTER (parallel) port 4 10BASE-T ports Power adapter receptacle Normal/Uplink push button Rear Panel of ...
Эта инструкция также подходит к моделям:Сетевое оборудование - PS110 (610.89 kb)
Сетевое оборудование - PS111W (610.89 kb)