Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики NETGEAR XAVB2602 |
Фрагмент инструкции
• The Powerline LED turns on when the adapter detects at least one other compatible Powerline device. The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate, indicated by the color displayed by the Powerline LED: - Green: Link rate > 80 Mbps (Best) - Amber: Link rate > 50 and < 80 Mbps (Better) - Red: Link rate < 50 Mbps (Good) Install Your Powerline Adapters This room has an XAV1601 Powerline adapter connected to a router. Room 1 The ports use Quality of Service (QoS) to prioritize traffic. Port 1 on the left is the high-priority video port. You can plug a power strip into the filtered outlet, but do not plug your Powerline adapter into a power strip. The filtered AC socket removes some electrical noise. Plugging a nearby device into the filtered AC socket improves performance. This room has an XAV2602 Powerline Adapter.Room 2 Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate. After the Powerline network is up and running, you can use the Security buttons on the adapters to add encryption to your Powerline network. NETGEAR recommends that you secure your Powerline network to protect your personal information and media from unwanted access. If you do not set up security on your network, anyone nearby with a Powerline network can potentially use his or her connection to gain access to your network and information you send over the Internet. This is especially relevant in settings such as apartment buildings, office buildings, dorm rooms, and other populated areas. CAUTION: Do not press the Security button until each adapter has powered up and its Power LED is solid green. Pressing this button too soon can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory default settings. To secure your Powerline network: 1. Make sure the Power LED is solid green. If it is amber, connect a device to one of the Ethernet ports so the adapter exits power saving mode. 2. On the first Powerline adapter, press its Security button for 2 seconds. The Power LED blinks green while the adapter is setting up security. 3. Within 2 minutes, go to the next Powerline adapter and press its Security button for 2 seconds. After security is set, the Power LED turns solid green. The adapter can communicate over the network. The Powerline LED is blinking or solid. Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. Registration is required before you can use the telephone support service. Registration through the NETGEAR website is strongly recommended. Go to for product updates and web support. For additional information about setting up, configuring, and using your Powerline AV+ 200 Nano Dual-Port Set, see the User Manual. For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: For GNU General Public License (GPL) related information, please visit the NETGEAR support site at: Safety Information • AC input:100-125V~, 0.2A max in North America and 200-250V~, 0.2A max in other regions, for the XAVB2602. • Operating temperature: 0C to 40C • The socket-outlet shall be installed near the equipment and be easily accessible. • Powerline adapter ratings (maximum load): EU: 16A 250V ~FR: 16A 250V ~ UK: 13A 250V ~AU: 10A 250V ~ NA: 15A 125V ~Swiss: 10A 250V ~ • Only power cords are allowed to be inserted into the filtered AC outlet; no other equipment with a direct plug-in is allowed. The power cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area. • Do not plug devices into the Powerline adapter filtered AC outlet that exceed the product ratings. The output voltage of the filtered AC outlet is the same as the power outlet that the Powerline adapter is plugged into. To help avoid damaging your system, be sure that the attached devices are electrically rated to operate with the power available in your location. • If the input AC voltage is less than 125Vac, the device plugged into the filtered AC socket of the Powerline adapter might not perform as well as expected. • DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip. The device is not intended to be used with home appliances such as air conditioners, power tools, space heaters, fans, hair dryers, ovens, or refrigerators. • Check the electrical current for any appliance used with the device, and do not exceed home and product outlet ratings and electrical requirements. Compatible NETGEAR Powerline Devices Your Powerline adapter can share a Powerline network with these compatible NETGEAR devices: XAV101, XAV1004, XAV2001, X...