Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarksand/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in theUnited States and/or other countries. Information is subject to change withoutnotice. Other brand and product names are registered trademarks ortrademarks of their respective holders. © NETGEAR, Inc. All rights reserved. Statement of Conditions In the interest of improving internal design, operational function, and/orreliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume anyliability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. XAVB1601v2_Full_IG.book Page 1 Thursday, November 8, 2012 9:04 AM Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Compatible NETGEAR Powerline Devices . . . . . . . . . . . . . . . . 7 1 XAVB1601v2_Full_IG.book Page 2 Thursday, November 8, 2012 9:04 AM Package Contents Powerline XAV1601 adapters Resource CD Ethernet cables (2) Your adapters might look like one of these: 2 3 Hardware Features Ethernet port Power LED Ethernet LED Powerline LED Security button Factory Reset button NETGEAR recommends that you do not plug a Powerline adapter directly into a power strip. XAVB1601v2_Full_IG.book Page 3 Thursday, November 8, 2012 9:04 AM XAVB1601v2_Full_IG.book Page 4 Thursday, November 8, 2012 9:04 AM LED Descriptions Item Description Power LED •Solid green. The electrical power is on. •Blinking green. The adapter is in the process of restarting or setting up security. • Solid Amber. The adapter is in power saving mode. •Off. There is no electrical power. Powerline LED •Solid green. The adapter is connected to a Powerline network. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key. The Pick A Plug feature lets you choose the electrical outlet with the fastest link rate, which is indicated by the LED color: Green: Link rate > 80 Mbps (Fast) Amber: Link rate > 50 and < 80 Mbps (Medium) Red: Link rate < 50 Mbps (Slow) Ethernet LED •Solid green. The Ethernet port is linked or data is being transmitted. • Off. There is no Ethernet connection 4 XAVB1601v2_Full_IG.book Page 5 Thursday, November 8, 2012 9:04 AM Button Descriptions Item Description Factory Reset button Press the Factory Reset button for 1 second, and release it to return the Powerline adapter to its factory default settings. Security button • After you plug in your new AV adapter, press the Security button for 2 seconds, and then press the Security button on one of the other AV adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes. • Press the Security button for 10 seconds to put the adapter into power saving mode. Press the Security button again for 0.5 seconds to wake it. Filtered AC Socket The filtered AC socket can remove some electrical noise that might affect Powerline performance. Plugging the power plugs of nearby devices into the filtered AC socket might improve performance. Warning: Do not press the Security/Power button on the Powerline adapter until installation is complete, and the adapters are communicating with each other (indicated by the blinking Powerline LED). Pressing this button too soon can temporarily disable Powerline communication. If Powerline communication becomes disabled, press the Factory Reset button to return the Powerline adapter to its factory default settings. 5 XAVB1601v2_Full_IG.book Page 6 Thursday, November 8, 2012 9:04 AM XAVB1601v2_Full_IG.book Page 6 Thursday, November 8, 2012 9:04 AM Room 1 Room 2 6 XAVB1601v2_Full_IG.book Page 7 Thursday, November 8, 2012 9:04 AM Compatible NETGEAR Powerline Devices Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAVB1301, XAVB1401, XAVB2101, XAVB2602, XAVNB2001, XAVB5601, XAVB5101, XAVB5201, XAVB5602, XAUB2511, XAVB5004, XAVB1004, XWNB5602, XWNB5201, and XWNB1601. For a complete list of HomePlug AV certified devices, go to 7 XAVB1601v2_Full_IG.book Page 8 Thursday, November 8, 2012 9:04 AM Safety Information: • AC input:100–125V, 0.1A (Max: NA) and 200–250V, 0.1A (Max; others), for product only. • Operating temperature: 0–40°C • The socket-outlet shall be installed near the equipment and shall beeasily accessible. • XAV1601 ratings (maximum load): EU: 16A 250V UK: 13A 250V NA: 10A 125V • Only power cords are allowed to be inserted into the filtered AC outlet; no other equipment with a direct plug-in is allowed. The power cord needs to be a maximum of 1m long and a minimum of 0.75 mm square of cross...