Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики NETGEAR MBR1310 |
Фрагмент инструкции
1. Log in to the router as described in Log In to Your Router on page 12. 2. From the main menu, select Wireless Settings to display the Wireless Settings screen. 3. In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button: 4. Select the Authentication Type setting: Automatic, Open System, or Shared Key. The default is Open System. Note: The authentication is separate from the data encryption. You can select authentication that requires a shared key, but still leaves data transmissions unencrypted. Security is stronger if you use both the Shared Key and WEP encryption settings. 5. Select the Encryption Strength setting: • 64-bit. Use 10 hexadecimal digits (any combination of 0–9, a–f, or A–F). • 128-bit. Use 26 hexadecimal digits (any combination of 0–9, a–f, or A–F). 6. Enter the encryption keys. You can manually or automatically program the four data encryption keys. These values have to be identical on all computers and access points in your network: • Passphrase. To use a passphrase to generate the keys, enter a passphrase, and click Generate. This automatically creates the keys. Wireless stations have to use the passphrase or keys to access the router. Note: Not all wireless adapters support passphrase key generation. • Key 1–Key4. These values are not case-sensitive. You can manually enter the four data encryption keys. These values have to be identical on all computers and access points in your network. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or A–F). 7. Select which of the four keys will be the default. Data transmissions are always encrypted using the default key. The other keys can be used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA authentication is selected. 8. Click Apply to save your settings. Configure WPA, WPA2, or WPA + WPA2 Note: If you use a wireless computer to configure wireless security settings, you will be disconnected when you click Apply. If this happens, reconfigure your wireless computer to match the new settings, or access the router from a wired computer to make further changes. 1. Log in to the router as described in Log In to Your Router on page 12. 2. From the main menu, select Wireless Settings. 3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your choice. 4. For WPA-PSK or WPA2-PSK, enter the passphrase. 5. To save your settings, click Apply. Use Push 'N' Connect (WPS) to Configure Your Wireless Network • NETGEAR’s Push 'N' Connect feature is based on the WPS standard. All other Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect. • If your wireless network will include a combination of WPS-capable devices and non-WPS-capable devices, NETGEAR suggests that you set up your wireless network and security settings manually first, and use WPS only for adding WPS-capable devices. WPS Button 1. Log in to the router as described in Log In to Your Router on page 12. 2. On the router main menu, select Add WPS Client, and then click Next. WPSbutton By default, the Push Button (recommended) radio button is selected. 3. Either click the onscreen button or press the WPS button on the front of the router. The router tries to communicate with the client (the computer that wants to join the network) for 2 minutes. 4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s instructions to click a WPS button. 5. Go back to the router screen to check for a message. The router WPS screen displays a message confirming that the client was added to the wireless network. The router generates an SSID, and implements WPA/WPA2 wireless security. The router will keep these wireless settings unless you change them, or you clear the Keep Existing Wireless Settings check box in the Advanced Wireless Settings screen, WPS Settings section. 6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these settings in the Wireless Settings screen. See Manually Configure Your Wireless Settings on page 26. Note: If no WPS-capable client devices are located during the 2-minute time frame, the SSID does not change, and no security is set up. WPS PIN Entry 1. Log in to the router as described in Log In to Your Router on page 12. 2. On the router main menu, select Add WPS Client (computers that will connect wirelessly to the router are clients), and then click Next. The Add WPS Client screen displays. 3. Select the PIN Number radio button. 4. Go to the client wireless computer. Run a WPS configuration utility. Follow the utility’s instructions to generate a PIN. Take note of the client PIN. 5. In the router Add WPS Client screen, enter the client PIN number, and then click Next. • The router tries to communicate with the client for 4 minutes. If no WPS clients connect during this time, the router wireless settings do not change. • The router WPS screen confirms that the ...