Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Enter a word or group of printable characters. When you use WPA-PSK, the other devices in the network will not connect unless they are set to WPA-PSK as well and are configured with the correct Passphrase. Use the procedures below to set up basic security settings in the WN311T. Network Connections and Wireless Security v2.0, February 2007 NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual Setting up WEP Encryption Security Follow the steps below to configure WEP Encryption Security. 1. Run the WN311T Smart Wizard. a. Make sure the WN311T software is installed and the WN311T Wireless PCI Adapter is installed in a PCI slot in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens: Figure 2-8 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the SSID entered exactly matches the SSID used by the access point. c. In the Security section, select WEP. Network Connections and Wireless Security v2.0, February 2007 NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual 3. Select the WEP encryption strength you will use: • 64-bit WEP data encryption • 128-bit WEP data encryption Note: Larger encryption keys require more processing and may slow the communications response times. 4. Select Create with Passphrase and enter the passphrase. The Smart Wizard automatically generates the WEP keys. Note: The characters are case-sensitive. Be sure to use the same passphrase for all the wireless devices in the network. If the passphrase method is not available in the other devices, you must manually enter the keys to match exactly what is in the access point and other 802.11b/g wireless devices. 5. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the configuration utility. Network Connections and Wireless Security v2.0, February 2007 NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual Setting up WPA2-PSK Security Follow the steps below to configure WPA2-PSK Security. 1. Run the WN311T Smart Wizard. a. Make sure the WN311T software is installed and the WN311T Wireless PCI Adapter is properly installed in the PCI slot in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 2-6 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the SSID entered exactly matches the SSID used by the access point. c. In the Security section, select WPA2-PSK [AES], and enter the passphrase. The passphrase can be a word or group of printable characters. For more information about wireless security, see the online document: reference/enu/wireless/index.htm. Network Connections and Wireless Security v2.0, February 2007 NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the Smart Wizard. Setting up WPA-PSK Security Follow the steps below to configure WPA-PSK Security. 1. Run the WN311T Smart Wizard. a. Make sure the WN311T software is installed and the WN311T is properly installed in a PCI slot in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 2-7 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. Network Connections and Wireless Security v2.0, February 2007 NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase. The passphrase can be a word or group of printable characters. For more information about wireless security, see the online document: reference/enu/wireless/index.htm. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the Smart Wizard. Advanced Settings The Advanced Settings normally work in their default settings. To view Advanced Settings, click the Advanced Settings button on the Settings tab. Changing these settings is only recommended for advanced users who have a specific reason to adjust them. Network Connections and Wireless Security v2.0, February 2007 NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual Stati...