Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Estimated Completion 10 minutes. Installation Note: The adapter is compatible with Windows Vista, Windows XP S2 and Windows 2000 SP4 operating systems. Windows XP SP1 users must upgrade with a Microsoft Hot Fix KB822603 first. 1. First, install the WN121T software. Insert the NETGEAR CD. If the CD main page does not appear, double click Autorun.exe on the CD. a. Click Install the Software. The Check for Updates window opens. b. If you are connected to the Internet, click Check for Updates. If not, you can choose to install from the CD. c. When the Installation Complete message appears, click Next. 2. Now, connect the Wireless USB 2.0 Adapter. a. Locate an available USB port on your computer. b. Insert the end of the cable on the Wireless USB 2.0 Adapter into the USB port. c. The Found New Hardware Wizard opens. Follow the wizard prompts. 3. Use the Smart Wizard to set up your wireless PC card. a. Windows 2000 users go to Step b. Windows XP or Vista users can set up the wireless adapter with the NETGEAR Smart Wizard (recommended) or the Windows configuration utilities. . • NETGEAR Smart Wizard: Reveals more information about each network and makes it easier to troubleshoot network connection problems. • Windows configuration utilities: See the Windows documentation or “Using Windows XP and Vista Wireless Configuration Utilities” at: b. Click Next to accept the Smart Wizard. You will be prompted to let the wizard help you connect to a network (recommended). c. Click Next to accept. 4. Connect to a wireless network. a. Select the wireless network from the drop- down list, and the wizard records your choice. Note: Hidden networks do not broadcast the Network Name (SSID). These networks are in the drop-down list, but the Network Name (SSID) is blank. If the network uses security, then the Smart Wizard detects it. Hidden Network b. Follow the Wizard steps for Security (if used) and for saving a Profile. c. After you have reviewed the settings, click Finish. The icon appears in the system tray and on the desktop; and the Settings page opens. The wizard initiates your wireless connection. It could take up to a minute for your wireless connection to be established. Check the status bar. Using the Status Bar The status bar is located at the bottom of the Settings page. Channel Security Throughput Signal Wireless strength network Find a Network Connection status Understanding the Status Bar Wireless network Identifies which wireless network you have joined. Security • Locked: security enabled. • Unlocked: security not enabled. Channel The wireless channel used by the network. If many wireless networks in your area use the same channel they can interfere with one another. Throughput Wireless throughput measured in Mega bits per second. To optimize throughput, connect to a network with a high-speed router or access point, and a high-speed Internet connection. Signal strength More dots indicates a stronger signal. Usually, you will experience higher throughput when the signal is strongest. Find a Network Click Find a Network to open the Connection Wizard. Connection status Identifies the status of your network connection. • Connected to Internet: Wireless Internet connection is OK. • Connected to Router: Wireless connection to the router is OK but the router is not connected to the Internet. • 169.254.x.x or ___.___.___.___ : The wireless connection to the router is OK but there is a problem with the router. See the online help or the NETGEAR RangeMax Wireless USB 2.0 Adapter Model WPNT121 User Manual on the NETGEAR CD. January 30, 2007 Technical Support After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product. Go to for product updates and Web support. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. © 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to chan...