Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
ENWhat’s in the box Wireless USB Adapter USB 2.0 cable Wireless USB Adapter SNU6600 English Welcome Quick Star t Guide 1 2 3 Install Connect Enjoy Quick Start Guide Installation CD What else you’ll need or Computer Wireless Router Other wireless devices USB 2.0 port Windows 2000/XP EN Introduction SNU6600 Thank you for purchasing the Philips Wireless USB Adapter. This Wireless USB Adapter is a WiFi (IEEE 802.11b/g) compatible USB device. It fully supports high data rates up to 108 Mbps with automatic fallback to lower speeds for secure operation at lower data rates in even the most difficult of wireless environments. In this manual we will expand on how to install, configure, and use your Wireless USB Adapter. This chapter will give you background information on wireless networks and their security in general. What are wireless network connections? Your wireless network adapter uses a wireless protocol (called IEEE 802.11b/g or WiFi) to communicate with other network computers by means of radio transmissions. WiFi radio waves travel outwards from the antenna in all directions, and can transmit through walls and floors.Wireless transmissions can theoretically reach up to 450 meters in an open environment and reach speeds of up to 108 megabits per second (Mbps) at close range. However, the actual network range and data throughput rate will be less, depending on the wireless link quality. Factors determining your network range and network speed • The environment: Radio signals can travel farther outside of buildings, and if the wireless components are in direct line of sight to one another. Putting wireless components in high places helps avoid physical obstacles and provides better coverage. • Building construction such as metal framing and concrete or masonry walls and floors will reduce radio signal strength. Avoid putting wireless components next to walls and other large, solid objects; or next to large metal objects such as computers, monitors, and appliances. • Wireless signal range, speed, and strength can be affected by interference from neighbouring wireless networks and devices. Electro-magnetic devices such as televisions, radios, microwave ovens, and cordless phones, especially those with frequencies in the 2.4 GHz range, may also interfere with wireless transmission. • Standing or sitting too close to wireless equipment can also affect radio signal quality. • Adjusting the antenna: Do not place antennas next to large pieces of metal, because this might cause interference. Securing your wireless network As wireless computer networks use radio signals, it is possible for other wireless network devices outside your immediate area to pick up the wireless signals and either connect to your network or to capture the network traffic.Therefore, you should always enable the Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA/WPA2) network encryption key to help prevent unauthorised connections or the possibility of eavesdroppers listening in on your network traffic. For an example of how to secure your network, please see the chapter Securing your wireless network. 1 USB Connector to PC For connecting the Wireless USB Adapter to the USB port of your PC. The difference between USB 2.0 and USB 1.1: - USB 2.0 wireless speed is max. 108 Mbps - USB 1.1 wireless speed is max. 11 Mbps 2 Integrated antenna Built-in antenna for establishing wireless connections. Your Wireless USB Adapter EN EN 3 Indicator LED Displays the network status. LED LED Meaning colour • Off when not connected or with PC switched off. PWR/ACT Blue • On when receiving power and ready for operation. • Blinking when transmitting data (network activity). 4 Label with MAC address The designation consisting of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in general, xx:xx:xx:xx:xx:xx) is the unique MAC address of this network device. Some safety features or network identification purposes need this MAC address. Install Install the drivers Place the Installation CD in the CD-drive EN Select Agree If this screen does not appear, start the CD manually 1 Open My Computer 2 Open CD-drive 3 Open Setup.exe Click on the Wireless USB Adapter photo Click on Install software Choose your situation: Either: Infrastructure (a) Or: Ad-Hoc (b) Click Click EN Wait until you see this window Connect your Wireless USB Adapter to the computer 1 Take the USB cable 2 Plug the square connector of the USB cable into the Wireless USB Adapter 3 Plug the Wireless USB Adapter into one of the USB ports on your computer The difference between USB 2.0 and USB 1.1: - USB 2.0 wireless speed is max. 108 Mbps - USB 1.1 wireless speed is max. 11 Mbps Click on finish > Your Wireless USB Adapter is ready for use after the reboot Connect Connect to your network Start Philips Wireless Network Manager program Double click on the tray icon EN If the Philips Wireless Network Manager does not start, double-click this icon View the available wireless networks 1 Select Site Survey 2 Cli...