Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The HP c-Class BladeSystem— referred to as the blade enclosure—supports up to eight Ethernet switch modules, which are installed in the interconnect bays of the blade enclosure. This guide also covers management options and troubleshooting help for the switch module. For details on the numbers, types, and the location of the blade enclosure bays, for additional information on the blade enclosure system, and for detailed port mapping information, see the HP BladeSystem enclosure installation poster or the HP BladeSystem enclosure setup and installation guide at For additional installation and configuration information about the switch module, see the Cisco Catalyst Blade Switch 3000 Series for HP documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved caveats, and last-minute documentation updates about the switch module, see the release notes, also on Cisco.com. When you use the online publications, refer to the documents that match the Cisco IOS software version that is running on the switch module. See the “Obtaining Documentation” section on page 1-24 for more information about the switch module publications. For translations of the warnings that appear in this publication and all safety and handling warnings for this product, see the Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3000 Series for HP that accompanies this guide. Before you continue with the installation, read the release notes for the blade enclosure. The release notes are available on the HP support website at For warranty information about the switch module, see the Hardware Warranty Terms for the Cisco Catalyst Blade Switch 3000 Series for HP on the documentation CD that ships with your switch module. 2 Taking Out What You Need Follow these steps: 1. Unpack and remove the switch module and the accessory kit from the shipping box. 2. Return the packing material to the shipping container, and save it for future use. 3. Verify that you have received the items shown on page 3. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. If the switch modules are ordered with the blade enclosure, they are already installed. The unpacking procedure for the switch module applies only if you order one separately. See the blade enclosure documentation for the unpacking procedure for the HP equipment. Shipping Box Contents 250286 24x SFP19-20 19-20 21-22 SYSTS-MODES-MSTRS-MMBR CONSOLE WS-CBS3120G-S MODE UID SFP 21 23x 26x STK A STK B DocumentationCD Cisco Switch Module Descriptions These sections describe the switch modules: • Cisco Catalyst Blade Switch 3120 for HP, page 3 • Cisco Catalyst Blade Switch 3020 for HP, page 5 The switch module is powered from the blade enclosure backplane. The switch module does not have a fan. The blade enclosure provides temperature management. The switch module connects internally to the management module through 100BASE-T Ethernet links. You can manage the switch modules through the HP Onboard Administrator management module on a management network that is isolated from other switch traffic. You can manage the switch module through the RS-232 console port that uses an RJ-45 connector in the switch module front-panel. You can also manage the switch module through any of the external uplink ports. Cisco Catalyst Blade Switch 3120 for HP The Cisco Catalyst Blade Switch 3120 for HP is a stackable, 25 to 27 Gigabit Ethernet port, Layer 3 switch module. The number of ports depends on the type of module installed in ports 19 to 22. See Table 1 for a description of the switch module ports. See the release notes and the software configuration guide for information about supported Layer 3 features. See the hardware installation guide for detailed information about stacking the switch. The Cisco Catalyst Blade Switch 3120 for HP has a 3120G and a 3120X model. Both are stacking-capable. The initial setup procedure for both models is the same. For more information about the features of each model, see the hardware installation guide and the software configuration guide for the switch module. Figure 1 shows the Cisco Catalyst Blade Switch 3120 for HP switch module. Figure 1 The Catalyst Blade Switch 3120 for HP 25015424x SFP19-20 19-20 21-22 SYSTS-MODES-MSTRS-MMBR CONSOLE WS-CBS3120G-S MODE UID SFP 21-22 23x 26x STK A STK B 74312569810131112 1 Switch module 8 LEDs for ports 19 and 20 2 UID1 LED 9 Gigabit Ethernet uplink ports 23 to 26 3 Health LEDs 10 Gigabit Ethernet ports 19 and 20 or 10-Gigabit Ethernet slot 1 4 System status LEDs 11 LEDs for ports 21 and 22 5 Mode button 12 Gigabit Ethernet ports 21 and 22 or 10-Gigabit Ethernet slot 2 6 Console port 13 StackWise Plus ports 7 Release latch 1. UID: unit identifier. Table 1 describes the Cisco Catalyst Blade Switch 3120 for HP switch module ports. Each external port has an associated LED. Ta...