Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Tip • To switch on the HDTV, you can also press the HDMI source button of your HDTV remote control (if available). Then select the HD device on the screen and press . For more information, see the user manual of your HDT V. Note • One-touch play feature does not apply in sleep mode. LED indicator status in standby mode Mode Status of the transmitter and receiver Standby (Listen Solid purple mode) Standby (Sleep mode) Solid red On mode Solid blue 14 EN English 5 Position the transmitter and receiver To ensure the units are located at the optimal distance without any interference, you need to: • Place the units in the same room. • This system is built to transfer the HD signal up to 20m or 66 ft. Its per formance can be affected by its environment and the obstruction between the transmitter and receiver. • If you use a 5 GHz WLAN or cordless phone, it is possible to have inter ferences. Press CHANNEL on the remote control to adjust the channel. Tip • For more information, see the section on”How to avoid interference”. In the interest of optimum transmission, do not place the transmitter of receiver in a metal enclosure or place a large metal object between the transmitter and receiver. EN 15 16 6 Wallmount the receiver You can either place the receiver near the HDTV or mount it on the wall. 1 Choose a spot near the TV. 2 Drill two holes in the wall. Ensure the distance between the two holes is 4.5mm. 3 Punch the supplied plastic wall anchors into the two holes on the wall. 4 Put the two screws into the plastic wall anchors and leave 3.2mm to mount the receiver on. 5 Hook the receiver on the wall. EN Product specifications 7 Technical data English General specification Supported resolution Video resolution 1080p @ 24/25/30 Hz, 1080i, 720p, 576p, Video HDMI in/ 576i, 480p, 480i (for 576i, 480i-component resolution Component only) and in frequency XGA: 1024 x 768 480i 720(1440)x480i @ / SVGA: 800 x 600, VGA: 640 x 480 59.94Hz Supported audio formats: 480i 720(1440)x480i @ / 60Hz Analog audio: 48KHz and 24-bit per sample 480p 640x480p @ / Digital audio: Up to 3.072 Mbps AC-3 and 59.94/60Hz DTS 480p 720x480p @ / Transmission distance: 59.94Hz 20 meters HD video transmission distance 480p 720x480p @ 60Hz / System latency: 576i 720(1440)x576i @ / 50Hz Less than 1 ms 576p 720x576p @ 50Hz / Antennas: 720p 1280x720p @ / High per formance internal antennas 50Hz HDMI: 720p 1280x720p @ / 59.94/60Hz CEC compliant 1080i 1920x1080i @ / Operating frequencies: 50Hz 5.16 ~ 5.24GHz 1080i 1920x1080i @ / 59.94/60Hz Power supply: 1080p 1920x1080p @ / Input: AC 100~ 240V/0.4A , 50/60Hz 23.98/24Hz Output: DC5V/3A 15W 1080p 1920x1080p @ / 25Hz Operating temperature: 1080p 1920x1080p @ / 0~40°C 29.97/30Hz Regulations: VGA 640x480p @ / CE 59.94/72.809Hz SVGA 800x600p @ / 60.317/72.188Hz XGA 1024x768p @ / 60.004/70.069Hz EN 17 Transmitter interfaces A/V interfaces YPbPr input Two sets of RCA connectors Analog audio L /R Two sets of RCA input connectors HDMI input Two (Type A) HDMI output Control signal interfaces IR sensor Power interface Power input 5V DC jack Switches Front power switch Yes (One tack switch) Source selection switch Yes (Four-tack switch) LEDs Status LED 1 x LED (Two Tone: Blue & Red) Source LED 4 x Blue LEDs Dimensions 295(W )x 149(L)x 45.5(H) mm Transmitter interfaces A/V interfaces YPbPr input Two sets of RCA connectors Analog audio L /R Two sets of RCA input connectors HDMI input Two (Type A) HDMI output Control signal interfaces IR sensor Power interface Power input 5V DC jack Switches Front power switch Yes (1 tact switch) Source selection switch Yes (4 tact switches) LEDs Status LED 1 x LED (Two Tone: Blue & Red) Source LED 4 x Blue LEDs Dimensions 295( W)x 149(L)x 45.5(H) mm Receiver interfaces A/V interfaces YPbPr input Analog audio L /R input HDMI input HDMI output One ( Type A) Control signal interfaces IR sensor Power interface Power input 5V DC jack Switches Front power switch Source selection switch - LEDs Status LED 1 x LED (Two Tone: Blue & Red) Source LED Dimensions 180(W )x 140(L)x 39(H) mm 18 EN 8 Troubleshooting There is no video displayed on my TV screen. Verify the POWER LED and SOURCE LED indicator on the transmitter: Flashing blue power LED • Ensure the transmission range between receiver and transmitter is not over 20m or 66ft transmission distance (with no obstruction between the transmitter and receiver). Move the transmitter closer to the receiver. Tip • For more information, check the section on “Position the transmitter and receiver”. • Press CHANNEL on the remote control to change wireless channel manually. Tip • For more information, check the section on “How to avoid interference”. Solid blue power LED + slow and flashing source LED • Ensure the audio format and video resolution of your A/V equipments are suppor ted and conformed to the technical specification. Tip • For more information, check the section on “Technical data”. • Connect the source device to your T V to check and modify t...