Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
User Guide for AIR-104/AIR-204 Chapter 5 Advanced Configuration Multiple Account Usage: If you have configured two Internet accounts, here you may control the “bandwidth on demand” feature. If you select “Connect 2nd Account Only if Needed” (the default), then the “bandwidth on demand“ feature will be enabled, and the AIR-104/204 will only establish a second connection if Internet traffic increases above an upper threshold. Once the traffic decreases below a lower threshold, the second connection will be taken down. If you select “Always Use Two Accounts”, then both connections from COM1 and COM2 will always be opened and closed together. Please note that this latter choice may result in increased phone and ISP charges. Idle Timeout: Set the number of seconds that the modem connection is allowed to remain idle before the AIR-104/204 will disconnect from the ISP. The idle timeout may set from 0 to 3600 seconds (the default setting is 300). If you select 0, the connection will never time out. Step 3 When you are finished, click the Apply button. Step 4 If you want to configure static DHCP assignments, click the STATIC DHCP button and continue on to the next section. Static DHCP Assignments You will need to create an entry on the DHCP Static Assignment Table for each PC that is to be assigned a static IP address. Step 1 Log onto the ICC. Find the Configuration heading on the ICC Menu, and click on Advanced Configuration. The Advanced System Configuration window appears in the main window of the ICC browser screen. Current settings are displayed. Step 2 At the bottom of the Advanced System Configuration screen, click on the STATIC DHCP button. The Static Assignment Table appears in the main window of the ICC browser screen. DHCP Configuration Static Assignment Table Name IP Address MAC Address Bing 192.168.168.95 00-aa-00-62-c6-09 Add Edit Delete User Guide for AIR-104/AIR-204 Chapter 5 Advanced Configuration Step 3 To add an entry to the DHCP Static Assignment Table, click on the Add button at the bottom of the table. The Add a Static Entry screen appears in the main window of the ICC browser screen. Step 4 Enter the following information to create a static DHCP entry: Name: Enter a name for your reference. IP Address: The IP address to be consistently assigned to this device. MAC Address: The hardware address associated with the Ethernet adapter of the network device. Please note that dashes must separate each pair of hexadecimal digits. Step 5 When you are finished, click on the Apply button. The DHCP Static Assignment Table will appear again in the main window of the ICC browser screen. Step 6 Repeat steps 3-5 to assign further static DHCP entries. You may also select an existing static DHCP entry by clicking it with the mouse; then click on the Edit button to edit the selected entry, or click on Delete to delete it. User Guide for AIR-104/AIR-204 Chapter 6 Management What is "management"? The management functions of the AIR-104/204 provide you with convenient tools necessary to update the AIR-104/204 over the long term. This chapter covers the following common tasks: • How to save or clear configuration changes • How to restart the AIR-104/204 • How to change my ICC password • What if I forget the ICC password? • How to upgrade the AIR-104/204’s software How to save or clear configuration changes While fine-tuning your Internet access, you may need to make temporary adjustments to the AIR-104/204; therefore, the configurations you enter will NOT be saved to flash memory instantly. Instead, the AIR-104/204 is designed to save to flash memory any unsaved configuration changes, every thirty minutes, automatically. For closer management, you can use the Configuration Options to save changes manually, or to clear the configuration completely. Step 1 Log onto the ICC. Find the System Tools heading on the ICC Menu, and click on Configuration Data Options. The Configuration Data Options screen appears in the main window of the ICC browser screen. Configuration Data Options Save the configuration to flash memory Clear the configuration and reset the system Save Clear and Reset Step 2 Step 3 Click Save to save the current configuration database to flash memory, or click Clear and Reset to erase your entire configuration database (in favor of factory defaults) and reset the system. When you click Clear and Reset, you will be asked to confirm your decision. Click Yes to clear the configuration and reset the system, or click No to cancel. Configuration Options Do you want to continue? Yes No User Guide for AIR-104/AIR-204 Chapter 6 Management How to restart the AIR-104/204 Besides toggling the power switch on the back panel of the AIR-104/204, you can also restart the system from the ICC Menu. Step 1 Log onto the ICC. Find the System Tools heading on the ICC Menu, and click on Reset System. The Reset System screen appears in the main window of the ICC browser screen. Reset System Do you really want to reset the system?...
Эта инструкция также подходит к моделям:Сетевое оборудование - AIR-104 (683.93 kb)